Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 38-10 faux finish?
#1

I just obtained a 38-10 that although quite dark, the cabinet is in good shape. Is the 38-10 a model that has the faux finish? I’m not experienced enough to tell from just looking at it and I don’t want to do anything to it until I know.


Attached Files Image(s)
   
#2

Sure looks like it. I've wiped them down w/a soft cloth and oms to clean off dirt and smoking residue. And then resprayed w/sanding sealer (a few coats). Do any t/u work and respray w/gloss. Looks like new.

GL w/your new project!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Hello Phil27,
Yes it is faux finish I have that exact radio in my collection and it is my next project for a full chassis restoration my cabinet is in great shape !

Sincerely Richard
#4

Just for future reference, our library has a list of the photofinish models. See:
https://philcoradio.com/library/index.ph...otofinish/
#5

Thanks very much. I’ll clean it up as best I can. Appreciate all the replies!
#6

Hey Bob,

That's pretty slick! That's the trick abt the library you gotta know where to look to find the right stuff.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

It's very likely dark because of layers of dirt, wax, oil, maybe even tobacco tar on the cabinet, GoJo cream hand cleaner, the non grit type, does a good job for cleaning dirt from wood cabinets, and many other things too.
Regards
Arran
#8

Hello Phil27,
Here is a Photo of mine !
Since this photo I bought a escutcheon outer ring from Ebay this is my next project to hit the bench the chassis has not been restored yet .

Sincerely Richard


Attached Files Image(s)
   
#9

I tried several methods to brighten the face up, nothing worked satisfactory for me…so I sanded off the faux finish, bought some walnut veneer and edging strips from Lee Valley and this is the finished product. 

Thanks again for all the helpful input!


Attached Files Image(s)
   
#10

Looks super, very nice indeed! What time is Jack Benny on?Icon_smile.

Paul

Tubetalk1
#11

Hello Phil27,
Looks great that what like about this hobby and this forum there so many great people here and why I see it if you are happy with it that what counts !!

Sincerely Richard




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM
Philco 37-116 Cabinet Repair
You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM
Philco 37-116 Cabinet Repair
Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM
Philco 37-116 Cabinet Repair
I have used Timber Mate Timber mate is a grain filler  . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM
Help with Supreme 599
The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM
Philco 37-116 Cabinet Repair
I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM
Philco 37-116 Cabinet Repair
Hello Guys, What I would do is get  colors of wax filler and fill in the void ! Sincerely Richardradiorich — 12:41 AM
Philco 37-116 Cabinet Repair
It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM
Help with Supreme 599
Iam only getting 4vac out of the tranny For the 80 filament. The line rheostat Looks fine and the tranny is getting 11...daveone23 — 08:45 PM
Rogers Majestic R-646
Transformers rewind? It's very easy! If you don't have round eyes  8-) Vlad95 — 01:55 PM

[-]
Who's Online
There are currently 1195 online users. [Complete List]
» 4 Member(s) | 1191 Guest(s)
AvatarAvatarAvatarAvatar

>