Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116X and the 6A3 tube
#1

Well, I already know my set has weak tubes, in fact one is very weak. Anyhow I used to purchase my tubes from a gent in Ohio (Bill or Bob?), Pick-a-Tube I believe. Heck it's been awhile. Anyhow suggestions on were to purchase them?

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

Bob Dobush at Find A Tube.

http://www.findatube.com/

Whenever I need tubes, I usually contact Bob first...great prices, great service, no complaints. A good guy to deal with.

Jim Cross at Vacuum Tubes, Inc. (who used to live in Ohio) is another honest seller.
http://www.vacuumtubesinc.com/

When it comes to tubes, the Ohioans are the good guys...not that the others are bad, only that I've had personal experience buying from both and can recommend either one.

--
Ron Ramirez
Ferdinand IN
#3

Bob would be the guy, thanks Ron.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#4

Comrade, the Russians now make 2A3 for your fine American radio.

http://www.tubedepot.com/so-2a3.html
I think there is a Chinese version as well. Available at K-mart, Martha Stewart brand I think.

But, I would look for a used American one (6A3).

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

The same seller also has Sovtek 6A3 tubes. Sold as a matched pair only, $129.95 for the pair.

http://tubedepot.com/so-6a3.html

Don't forget your Tube Cube for your nice, new, expensive Sovtek tubes.

...or, buy two 6A3 tubes from Findatube.com for $28.00 each NOS, or $18.00 each used.

Hmmm...new Sovtek for $129.95 or NOS from Bob for $56.00?

Ask Charlie what he thinks about this choice:
http://www.youtube.com/watch?feature=end...FKfQN5Y7Ds

--
Ron Ramirez
Ferdinand IN
#6

Wow!
Bob does have some very good prices on both new and used. Never have bought tubes from him but he is a good source for Sam's folders. Have gotten some TV folders from him over the years. Good guy and fast service.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

Picture of Bob watching aliens land starship in his back yard:


[attachment=0]

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

LOL.... I met Bob about 5/6 years ago at an on-site auction. Naturally plenty of tubes to be auctioned for everyone... Nice guy Icon_wink I did see the Russian versions. But I cannot bring myself to stuff those in one of my fine American made Philco's (or any American radio for that matter). If that's all there was or the American made versions hit $250 a tube, I'll consider it.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#9

From what I've heard from some of my ham buddies the Russian tube are ok but the Chinese jobs are not very good. I'd stay away from them. Agree with Ron a good pair of used US tubes is your best and cheaper way to go. The reliability will the best.
GL and hold on to your wallet.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I have used Bob several times and he is great to deal with. His prices for 6A3s, 6L6s, and 6B4s are better than what you will find on eBay. Plus his tube for sale listing is huge.




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2304 online users. [Complete List]
» 3 Member(s) | 2301 Guest(s)
AvatarAvatarAvatar

>