Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Tropic Model 42-760T
#16

Unfortunately I do not have another 1942 Tropic of this type with a back to use as a pattern for this one. I might use my 53-960's back as a pattern; the 53-960's back is taller and a bit wider, though.

The set probably looks better in the photos than it really is. There is some missing veneer just along the back edge of the top. The entire cabinet will have to be refinished. The chassis will need extensive work as well.

--
Ron Ramirez
Ferdinand IN
#17

I've stripped the cabinet:

[Image: http://www.philcoradio.com/images/phorum..._00001.jpg]

More info here:

http://www.philcoradio.com/phorum/showth...p?tid=4730

--
Ron Ramirez
Ferdinand IN
#18

I have one of these in very good physical condition.
#19

Welcome, Kathleen! Can you tell us more about your 42-760? Any photos?

I just noticed that I posted the "stripped" photo of my 42-761 nearly three months ago, and since then the only thing I have done to it is to glue one area that was coming loose, and to completely sand it down in preparation for grain fill. This summer has not been as ambitious for me as last summer was as far as refinishing cabinets goes, mainly due to the heat wave.

--
Ron Ramirez
Ferdinand IN
#20

Actually, it is probably a 42-788T. Do you know anything about that model? .....Including, generally, a range of how much it might be worth in very good physical condition. ....Probably needs tube relacements.

I don't have a picture of our set, as it is at my Brother's house. They are currently out of town, so I can't verify that it is a '41 or '42 or get a
picture right now.
#21

Kathleen, sorry for not replying sooner...I got busy and forgot about this thread. Icon_redface

I have a photo, and some info, on the 42-788 here:

http://www.philcoradio.com/gallery/1942a.htm#ah

Very similar to the previous model year's 41-788, only the 42-788 added an extra band on the left side dial making four bands on the left and five on the right.

The 41-788 had three bands on the left and five on the right:

http://www.philcoradio.com/gallery/1941a.htm#bf

Hope this helps.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>