Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 60MB
#1

Found this radio today at a flea. No tubes or logo but everything else looks nice. Haven't pulled the chassis yet but looking at the top it looks original. Any pitfalls to repairing the chassis on this I should know about?

[Image: http://i248.photobucket.com/albums/gg187...ck2012.jpg]
#2

Hey, congratulations on your find, you lucky dog! Icon_thumbup I just narrowly missed out on one of those at the Nashville swap meet last Saturday.

Jim are you sure that isn't a model 66? Usually the model 66 has grille cloth as shown on your set; the 60MB's cabinet is identical but the cloth is a strange mottled combination of black and gold, unique to the 60MB:

[Image: http://www.philcoradio.com/gallery/images/1934/60mb.jpg]

In any event, watch for the usual pitfalls: bad antenna and/or oscillator coils in addition to the usual necessity of replacing all paper and electrolytic capacitors, and replacing all resistors more than 20% off tolerance.

--
Ron Ramirez
Ferdinand IN
#3

(05-06-2012, 05:30 PM)Ron Ramirez Wrote:  Hey, congratulations on your find, you lucky dog! Icon_thumbup I just narrowly missed out on one of those at the Nashville swap meet last Saturday.

Jim are you sure that isn't a model 66? Usually the model 66 has grille cloth as shown on your set; the 60MB's cabinet is identical but the cloth is a strange mottled combination of black and gold, unique to the 60MB:

[Image: http://www.philcoradio.com/gallery/images/1934/60mb.jpg]

In any event, watch for the usual pitfalls: bad antenna and/or oscillator coils in addition to the usual necessity of replacing all paper and electrolytic capacitors, and replacing all resistors more than 20% off tolerance.



No Ron, not sure if its a 60MB or 66. The top of the paper tag on the inside has been ripped off so no concrete model number to go on. Other than the grille cloth is there any other way to distinquish between the 2?
#4

Yep - the 66 has a SW band that tunes 4.2 to 12 MC. The 60 only covers 1.5 to 3 or 4 MC on its second "police" band.

I think the 66 tunes up to 1600 or 1700 kc on AM; the 60 only goes to 1500 or so on the first (AM) band.

--
Ron Ramirez
Ferdinand IN
#5

(05-06-2012, 10:11 PM)Ron Ramirez Wrote:  Yep - the 66 has a SW band that tunes 4.2 to 12 MC. The 60 only covers 1.5 to 3 or 4 MC on its second "police" band.

I think the 66 tunes up to 1600 or 1700 kc on AM; the 60 only goes to 1500 or so on the first (AM) band.

Ron, you were right. It is a 66B. AM tunes to 1700 KC and the SW tunes to 16 MHZ. Thinking the grille cloth maybe hard to find so I will probably leave it as is.

#6

I don't blame you on the cloth. That is one of the patterns that was never reproduced. It's the same cloth as used in the larger 1935 model Philco cathedral sets (AM-only 18B, 118B, 144B).

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started repairing the chassis.. ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 771 online users. [Complete List]
» 2 Member(s) | 769 Guest(s)
AvatarAvatar

>