Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pilot Lamp Source?
#16

On their site, they mention flat-top and concave lens. In their description, they mention that the concave lens have Wide angle (170 degrees) and their flat top lens have Medium Angle (120 degrees). Not sure what the frosted lens would do. I guess it spreads the light more equally or something.

The white ones could be either colder (bluer) or warmer (yellower) and they should mention it, I am surprised they don't. Where I get mine locally (Starburst is the biggest Canadian coin-up distributor) they don't store yellow because most people just use warm white, but if you ask white they specifically ask what white you want.

Being that I have contacts locally for coin-up parts, I rarely order online. But a place that I hear a lot is cointaker.com
Here's some that might be interesting because of the "glass bulb look" (they name it retro just for that)
notice how they differentiate between cool white and warm white
http://shop.cointaker.com/category.sc?categoryId=150

(I realize the bulb makes it a bit more expansive...)

-Mars
#17

Thanks for the info Mars! I just ordered some retro's, super brights, and ultra brights in both cool and warm white to experiment with. When Pinball Life gets more white LED's in stock I'll try them too since they are quite a bit cheaper.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#18

Keep us updated about your findings.!

-Mars




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1863 online users. [Complete List]
» 1 Member(s) | 1862 Guest(s)
Avatar

>