The Philco Radio Story on Video
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
This video, featuring a silent film from 1929 shot in the Philco factory at Ontario and C Streets in Philadelphia was available for several years on VHS tape. I think that it was on DVD at least briefly. It appears the company which produced the video, Encore Home Entertainment, has gone out of business as I can no longer find a website for them. Encore is still around and still selling the video - see post #14 below.
Anyway, Codefox brought it to my attention that the video is now available on YouTube. The resolution is not great, but viewable.
You can watch it here, or click the YouTube logo in this thumbnail to watch it on the YouTube site:
[Video: https://www.youtube.com/watch?v=kanPsUDyKrU]
--
Ron Ramirez
Ferdinand IN
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, another reason for me to hope we will be finally able to get DSL next week! 
No matter where you go, there you are.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
So Ron, Is that a model 87 they're putting together??? Didn't see any holes for the grid leads in the coil shields.
Terry
Posts: 4,896
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I think there may be a similar silent film showing a tour of the old Rogers-Majestic plant in Toronto, but I have never seen any more of it then some footage of the outside of the plant and Ted Rogers in his office. I've heard of the Philco factory tour, and have seen ones put out by RCA, I think there may also be one of the Atwater Kent plant in Philadelphia as well.
Regards
Arran
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi Ron
That was really interesting, thanks for posting I really enjoyed it 
Joe
Joe Bratcher near Louisville, KY
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Interesting video! I don't have an 87, but I have (I know I said I wasn't buying anymore  ) model 65 in that cabinet. Hey, it was only $20, so how could I turn it down?
Gene
(This post was last modified: 03-10-2013, 10:13 AM by Gene Pederson.)
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
I've got an 87 and a 95 with that cabinet too.
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Nice video and I'm looking for a 95 highboy. Seem either hard to find or very expensive.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Neat!
Posts: 40
Threads: 5
Joined: Apr 2008
Ron, Loved the video. Much better than expected. Thanks again.
Dave D
Posts: 1,411
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
How things have changed, OSHA would have a hayday in that factory! The total lack of machine guarding and the guy spraying lacquer with no respirator.
Steve
M R Radios C M Tubes
Posts: 52
Threads: 1
Joined: Mar 2013
City: Minneapolis, MN
Thanks. It impresses everybody.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hold the phone, folks. Encore Home Video is still around and still selling the PHILCO video on DVD:
http://encorehomevideo.com/radio/philco.html
--
Ron Ramirez
Ferdinand IN
Users browsing this thread:
|
|
Recent Posts
|
|
Model 70 Cabinet Trim
|
| Hello musar,
First all welcome to the forum and yes that is true that steve stopped making trim .
Sincerely Richar...radiorich — 12:13 AM |
|
Model 70 Cabinet Trim
|
| I have recently come into possession of a Model 70. The trim around the base needs to be replaced. If this were years ...musar — 12:07 AM |
|
philcorepairbench.com - shadow-meter
|
| Anyone know of a way to recover these files from the repair bench? Thanks.
fenbach — 11:16 PM |
|
Philco model 38 code 121 not receiving signal.
|
| That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM |
|
Philco model 38 code 121 not receiving signal.
|
| A DMM is good enough.
One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM |
|
Philco model 38 code 121 not receiving signal.
|
| I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM |
|
Philco model 38 code 121 not receiving signal.
|
| I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
|
Philco model 38 code 121 not receiving signal.
|
| It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
