Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Thought I heard a faint signal...
#1

Was able to play with the 42-400 over the weekend, and piqued the SW1 and 2 bands, bringing in more stations. Rolled up and down the FM dial (like I have 100 times before with complete silence through the speaker), and thought I heard a faint station. Zoned in on it and pulled it in. Actually pulled in quite a few stations, but topped out around 99-101 MHz, or thereabouts. Had to back the FM IF adjusters way out, and adjust the compensators. I had sleeved the fm antenna wires going up to the cabinet during recap, keeping the original antenna wire and crumbling orange insulation going around the backside of the cabinet. Had the two antenna wires coming off the chassis running parallel to each other to the cabinet, but when I twisted these together going up, my signal strength and volume dramatically improved, and found the more I fooled with the antenna, the better it got. She pulls a good dozen stations now, with varying intensity, 3 or 4 being prominent: 24 hour news talk, country, and a hard rock station. Oh, lest we not forget ESPN, of course. ( It's kind of tricky to get the tuner to the signal peak, though. It was drifting slightly the first 2 hours, but seems to have stabilized. Icon_biggrin a little more tweaking, I suppose). Now SW1 is suffering with bleed over from FM, but I think I can find a happy medium between the two. Perhaps if I modify the existing antenna, the signal will improve further, then I can re tune the shortwave. This radio probably hasn't received FM signals since they went to the new style FM in what, 1945? 68 years? That to me is nothing short of a miracle! The first song she played was Hearts' "Crazy On You". I never really appreciated what a wonderful rich tone Philco's possess- now that she can play music instead of talk radio. Any ideas on an FM antenna, and tuning "tricks"? Thanks for lending your ears. Heart She's won me over!
#2

Sound Great!!! I think what you want to do is make sure your antenna is the proper length for the FM BC band. This should minimize the SW pickup. Best I remember it should be about 30" long.
Good luck w/it
Terry




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Hi OSanders, Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM
5U4 vs 5Z4 tubes
I think that RCA and GE introduced metal tubes in the USA in 1936.  I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM
Philco 42-345 Restoration/Repair
Vlad95, Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM
5U4 vs 5Z4 tubes
A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM
Philco 42-345 Restoration/Repair
Thanks Rod, "When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM
Philco 42-345 Restoration/Repair
RodB :beerchug:Vlad95 — 10:22 AM
Philco 42-345 Restoration/Repair
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM
5U4 vs 5Z4 tubes
The pinout is the same but the 5U4 has a 3 amp filament, verses 2 amps or less on the 5Z4. I think that the pinout of a ...Arran — 12:04 AM
Philco 42-345 Restoration/Repair
By the way. osanders0311 Take a look here: Dial cord stringing Guides May be here you can fount correct string settin...Vlad95 — 11:15 PM

[-]
Who's Online
There are currently no members online.

>