Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Best performing Philco Tombstone on SW
#1

Having had many 30s Philco Tombstones and cathedrals during the last 35 years I am Curious of others opinions. My best performing set all round was the 16 code 125/126. Would like to hear others opinions
#2

Agree on the 16-125/126/127, which is the four band set with an RF amp as well as two stages of IF. I would rate the 116B (121) and 116X (122) up there with the four-band 16, as there are only minor differences between the two, chiefly the addition of long wave in the 116.

--
Ron Ramirez
Ferdinand IN
#3

116x? not familiar with it, difference between it and the 116b?
#4

Sorry, the 116X is a console so it is outside the scope of this discussion. (I should pay closer attention before I type.) Icon_redface

http://www.philcoradio.com/gallery/1936a.htm#j

The 116X uses 6A3 output tubes and a slightly different tone control circuit. The 116B uses two 42 output tubes, like the 16.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 543 online users. [Complete List]
» 1 Member(s) | 542 Guest(s)
Avatar

>