Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-216 Remote Control
#1

Does anyone have any pictures of the wireless remote control that came with the Philco 40-216?
Oops, I see that I have inquired about what is referred to as the Philco Mystery Control. I found the information on the website. Now I know what it looks like. I will have to absorb all the data presented on the unit. I may have a chance to get a 40-216 that was equipped with the mystery control. I don't think the mystery control is with the radio any more though.

Thanks in advance.
#2

The Mystery control sets are very interesting. I have restored a 39-116 and its little brother a 39-55 both are MC sets. The mechanism can be a real pain in the butt to get working correctly. However once working it will make a great conversation piece.

I have parts for the 39 model year MC sets, I believe most will work in the 40 model year sets. Let me know if you need any parts.

-Keith
#3

Keith;

Thanks for your offer of parts. I will soon get to look over the radio to see if it is a candidate for restoration. I think it may be. It was purchased new and owned by an older couple. It may be in relatively good shape as it is still in the house where they lived. Hopefully it has not been subject to mice infestation.

Joe




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1305 online users. [Complete List]
» 2 Member(s) | 1303 Guest(s)
AvatarAvatar

>