Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Scored a 37-116x DeLuxe today
#1

I got lucky today and was able to pick up this 37-116x DeLuxe.

The only problems I can see right off is one of the knobs is incorrect, and the speaker is trashed. Seems grand kids and old grill cloth and speakers don't play well together. The chassis is a monster on this radio and looks fairly complicated with the magnetic tuning circuits. Should be a fun restore.

Thanks to my wife who tolerates my hobby.. Icon_biggrin

Here are a couple pics:

[Image: http://i1129.photobucket.com/albums/m501...731297.jpg]

[Image: http://i1129.photobucket.com/albums/m501...5204d6.jpg]

-Keith
#2

Nice! I know the 38-116 is a slightly better performer, but I think the 37-116 is a far better looking radio. Congratulations!
#3

Keith, you are right, the chassis is a monster. I traveled 6 hrs round trip for mine back in the fall. My wife also is terrific to go along with this. My grille cloth is shot too but the speaker is good. Cabinet on mine is good too except for the top which must have held an overwatered plant. I hope to start on it before spring. Enjoy yours

Ron

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84
#4

Congrats!!!
Fortunately sounds like so far the grill cloth and spkr are not that big of a deal to replace/repair. I'm sure you'll have a lot fun getting it back in tip top shape. And when it's all done you'll have a very nice HiFi set!
Terry
#5

Great radio, the speakers can be acquired or reconed.
Grandkids should be spanked om a regular basis and the grill cloth will stay intact, but here in the US we seem to prefer the environment to be ruined as long as we do not spank anyone.

Congrats!
#6

That's swell, Keith!! Great find!!

Icon_thumbupIcon_thumbupIcon_clapIcon_wave
#7

Keith, great find and tougher to find in AZ! I restored a chassis for a friend and they are a beast to work on. The "magnetic" tuning actually works well although there is nothing really "magnetic" about it. The sound out of it beats most radios from that era, the variable IF spread makes a noticeable difference in the quality of sound out of the radio.
Enjoy the adventure.
Regards, Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#8

Keith great find I am sure you will have her playing in no time. A keeper for sure.




Users browsing this thread:
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>