Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 40-158
#1

I just received a Philco model 40-158. I'm new to the hobby, but have wanted to restore an old floor radio for some time!! The cabinet is in good condition, but the faceplate is missing. Can anyone tell me where to go to find a faceplate for this particular model? I've looked at a bunch of sites on the net, but fail to find anything. Also, does anyone have a photo of this model that shows the close up views? I have purchased the book by Ron Ramirez...excellent read!! Icon_biggrin
#2

Hi

Unfortunately the only way you are going to find the bezel for your radio is to obtain one from a junk 40-158, 40-160 or 40-165. You might try the Radio Junkyard.
http://www.vintage-electronics.com/
(scroll down for the Radio Junkyard link)

Glad you like the book. It isn't the one I wanted to publish..it is essentially the original 1993 edition with new covers.

--
Ron Ramirez
Ferdinand IN
#3

Thanks for the help. Are the 40-160 and 40-165 basically the same style radio as the 40-158?
#4

Yes.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1844 online users. [Complete List]
» 1 Member(s) | 1843 Guest(s)
Avatar

>