Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 118x
#1

Hi fellow collectors,

I've a chance to pick up a Philco 118x console in my area, going cheap for around $30. Currently it's painted white which is sad, but I'm sure with some basic cabinet stripping it could be OK.

Opinions? Worth it?? Owner claims the chassis is complete and working

73 de,

Gary/N9VU
#2

Hi Gary

The chassis alone is worth $30 easy...go for it! Icon_smile

I once had to restore a Model 84 cathedral that had been painted white. I know a local collector who is good a refinishing cabinets, so I let him deal with the white paint while I fixed the electronics. In this case, the white paint had been applied over the original finish, making it easier to strip off. Hopefully your 118 will be easy to strip, also.

--
Ron Ramirez
Ferdinand IN
#3

Ron Ramirez Wrote:Hi Gary

The chassis alone is worth $30 easy...go for it! Icon_smile

I once had to restore a Model 84 cathedral that had been painted white. I have a local collector friend who is good a refinishing cabinets, so I let him deal with the white paint while I fixed the electronics. In this case, the white paint had been applied over the original finish, making it easier to strip off. Hopefully your 118 will be easy to strip, also.

My same thoughts as well, Ron. It reminds me of the 16x console I bought for $5 at the end of radiofest. I'm sure you are familar with the chassis it holds. The cabinet was also painted but painted over the finish so this has allot of potential.

I'll see if this local guy still has it. There's always room for another console, or is there? Icon_biggrin

73 de,

Gary/N9VU
#4

Picked this up this weekend. Works well as is but I'm sure a recapping will be in order. Painted a real cheesy white but beginning to flake off and uncover the original finish underneath. On a good note this unit even has the original back in good condition. Should make a good project.

73 de,

Gary/N9VU
#5

I have the 118MX version, nice radio well worth the money you spent on it.
#6

Reading this is giving me incentive to rebuild my 118RX two piece chairside with separate speaker. It really looks like a decent set with triode connected 42s in class A. The speaker in this set is 12 inches but is a pemanent magnet type, sort of like a big version of their farm set speakers. I wonder if this speaker will sound as good as the electrodynamics in the other versions of the 118. They apparently learned not to run high voltage and AC power through the speaker connecting cable by this time as it is only two conductor line cord in this set.

Fred R
#7

49Stude63 Wrote:I have the 118MX version, nice radio well worth the money you spent on it.

I always thought it was worth it but if your photos indicate what's underneath all that nasty white paint, it looks like an enjoyable set.

73 de,

Gary/N9VU




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started repairing the chassis.. ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 775 online users. [Complete List]
» 2 Member(s) | 773 Guest(s)
AvatarAvatar

>