Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Beautiful Deforest console
#1

Here's another purchase from Sargent's auction. Here we have a Deforest/ Crosley (Canadian )  model 6d-932 and will be a show stopper when I get done with it Icon_eek


Attached Files Image(s)
   
#2

(05-11-2015, 09:01 PM)Fred Taylor Wrote:  Here's another purchase from Sargent's auction. Here we have a Deforest/ Crosley (Canadian )  model 6d-932 and will be a show stopper when I get done with it Icon_eek

That actually looks like it's in pretty decent original condition. In all honesty it looks like all that it needs is a touch up, and maybe a light sanding with a top coat of clear lacquer at most. The brand name was Deforest-Crosley, and they were manufactured by Rogers-Majestic Ltd in Toronto. In case you are wondering, it's a 1936 model, with nine tubes, and three bands (I think). Most of these sets had fancy names rather then model numbers, the 6D-932 is the chassis number, the model name may be stamped or stenciled on the inside of the cabinet, possibly on the chassis shelf.
The cabinet will be the least of your worries, like 1939-42 Philco sets, and Atwater Kents, Rogers liked to use rubber/gutta perch covered wire, and hand wired circuit boards with weird 1/3 Watt resistors (BED coded) with spade terminals.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM

[-]
Who's Online
There are currently 246 online users. [Complete List]
» 1 Member(s) | 245 Guest(s)
Avatar

>