Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bluetooth in vintage console radio?
#1

Anyone able to install a phono switch in a 1940's radio console?
Have a RCA switch in my 9X531 Golden Throat that I plug in a belkin bluetooth that works great.
Can that be done in , for example, a 1941 Zenith 8-S-563X?
Any other method?
#2

Welcome to the Phorum!
Icon_wave

Sorry, don't know the answer to your question though.
#3

Practically any radio can be fit for linear input, some have inputs that are ready, some require mods but the rule is, if you have an audioamp, you can always fit the input in there, matter of some adjustments.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

(04-10-2016, 03:03 PM)nicfic Wrote:  Anyone able to install a phono switch in a 1940's radio console?
Have a RCA switch in my 9X531 Golden Throat that I plug in a belkin bluetooth that works great.
Can that be done in , for example, a 1941 Zenith 8-S-563X?
Any other method?

 Buy a late 1930s or early 40s RCA or G.E console, they came with phono jacks from the factory, maybe some others did too but not Philcos. Otherwise an SSTRANS or some other low power AM transmitter is probably the better way to go, and requires no modification of the radio.
Regards
Arran




Users browsing this thread:
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum! :wave: Here's the schematic for that radio from our digital library: Something to do bef...klondike98 — 08:05 PM
Philco Model 38-7: what caps & resistors do fail typically?
Hi all, on vacation in Montreal,  a friend of mine showed me a Philco Model 38-7 console radio from the 30ies. Mechan...Musaeum — 07:21 PM
Part numbers to model cross
I looked thru the documents and did not see one. Might have missed it though.Jim Dutridge — 07:16 PM
Philco 42-345 Restoration/Repair
Please tell me this was it, I replaced resistor 27 and it's playing on the broadcast band. I am afraid to change the ban...osanders0311 — 06:12 PM

[-]
Who's Online
There are currently 1105 online users. [Complete List]
» 2 Member(s) | 1103 Guest(s)
AvatarAvatar

>