Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Cabinet Radio Turntable and 8 Track
#1

Found this little treasure but unable to find any information on it!? Radio works, turntable turns but needs new needle, and I haven't found an 8- Track to try!! Any information about my wonderful find is greatly appreciated!


Thank You!!


Attached Files Image(s)
               
#2

Hi and welcome to the Phorum,
Your little gem dates from 1976 and the technical info can be found in Sams Photofact #1604-3. Generally the Philco sets we discuss are a bit older late 20's thru early 60's. Not that it's a problem or anything but by the 1970's a lot of electronics were being built overseas and the information can be a bit sparse. Gosh has really been 41yrs since the Bicentennial?? Seems like it was yesterday!

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Moved here since it is a stereo system.

Hi windeaq and welcome!

--
Ron Ramirez
Ferdinand IN
#4

Midcentury modern.....I am not even sure it was made by Philco here in the US, plus the Philco was not really Philco anymore by that time.
But if this gets you into Hi-Fi and interested in Philco which was a great company in its time, that would be wonderful.

Welcome!

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Looks like that stereo was built by Sylvania in Batavia NY, so it is US made. I once had a Sylvania colorTV built there.

Both Sylvania and the Philco consumer brand were owned by General Telephone and Electronics (GTE) in the 1970's, so it makes sense that Philco products were made at the same factory.

Visited Batavia years ago and found the old Sylvania plant. Building is still there with a different occupant. Locals I spoke to still remember working for Sylvania, building TV sets in the 1960's and 70's.
#6

Thank You Very Much!! Super Excited Now!!
#7

8-tracks still have quite the cult following. We have record shops and vintage shops here that usually have some sitting around. Hopefully you get to fire it up soon.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#8

I had a very similar model a number of years ago... Had to replace the belt for the 8track, and also had to clean the switches and such, easy fixes and sounded pretty good for what it was  Icon_biggrin
#9

Welcome to the Phorum!
Icon_wave




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2294 online users. [Complete List]
» 4 Member(s) | 2290 Guest(s)
AvatarAvatarAvatarAvatar

>