Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-650X Tone, On/Off ctrl switch
#1

My 37-650X console arrived in pretty good shape considering it went from Mass to Florida.  FEDEX did manage to snap the Tone,  on/off switch (part #64) arm off flush with the nut on the chassis front.  I was wondering if anyone had any ideas on what models might have a replacement. The more options I have the better chance of finding a chassis on ebay.  Or maybe install a seperate on/off switch and wire it up for one tone? 

My plans are other than listening to Shortwave is to play my RCA 45 rpm record player thru it.  I will have to rig a phono output for it so if anyone has any ideas on where I would tap in that would be appreciated.  Thanks for any help or ideas.

Schematic

Tt
#2

It looks like 37-650 tone control is part 42-1184.

At a minimum it looks like that's shared with:
  • 37-660
  • 37-670
  • 37-665

There may be others but none of those sets are particularly common. It may be easier to find an electrically compatible rather than exact replacement.
It might also be possible to repair the broken shaft.
#3

Tks for the info Nathan.  I was thinking that I would probably have to sub in an equivalent part.  Maybe even a sep switch and the tone control.  This is going to be yet another of my personal radios lol so as long as it works it doesn't have to be original.  I will just keep an eye out on ebay for a poss replacement.

Any ideas on how to wire in a phono plug?  I was thinking that usually you just tap off of the center tap of the vol pot but not sure.  Also would have to install a switch to cut off ant input I imagine.
TKs again
Tt




Users browsing this thread:
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>