Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

replacing artificial leather on a 46-350 radio
#1

has any one replaced the artificial leather and do you have any instructions on do it I need all the help i can get, thank you
#2

I have patched the covering for this model but never had to replace it. I did a restoration on a Zenith TO (R600 I think) and discovered techniques for replacing the skin on Zenith web sites. I would imagine it's much the same. If you can get the old sections off in one piece, maybe with a little heat and a blade, you will have a pattern for each piece. Take lots of pictures.
#3

The previous owner cut holes in one side so I removed the ends and all other leather. The ends came off in one piece but they seemed to have been formed around the corners no cut marks.
#4

Donald, do you have a picture of your radio?

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

I have pictures on my phone but don't know how to download to your site I am not computer savy
#6

How - to add pictures:

https://philcoradio.com/phorum/showthread.php?tid=29

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM

[-]
Who's Online
There are currently 1154 online users. [Complete List]
» 3 Member(s) | 1151 Guest(s)
AvatarAvatarAvatar

>