Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cleaning paint from 46-420 bakelite case
#1

Hello Experts,

I'd like some suggestions for the gentle removal of paint spots from a really nice Hippo bakelite cabinet. It polished up really nicely, but at some point it got flecked with paint. I can, with great effort, clean up each fleck with a fingernail. Maybe some has a gentler method.

Thanks,

Dave
#2

Rubbing compound on a Qtip or a dental pick easy on the pressure. David
#3

My favourite paint spot tool is a razor blade scraper, the type where a hard backed safety blade slides into a holder. I always round of the corners of the blade on sandpaper so they won't catch and scratch, then hold the scraper on a shallow angle and be gentle. They usually come right off.
#4

Thanks for the suggestions. Good Deal.
#5

Bakelite is resistant to solvent paint remover but not a caustic paint remover. Some Bakelite will be O.K. with oven cleaner lye. But I would not use it.

Never clean Bakelite with Windex, 409 or other "super" household cleaners. They can remove the top surface and permanently leave the finish dull.

Mechanically removing the paint has risks...  chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#6

if its latex house paint xylene or sold in hardware stores as "goof off" will work




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 370LZ chair side not a 71LZ
If you look back at the picture of the bottom of my chassis, you will see the on / off switch almost directly under the ...slford310 — 05:48 PM
Value of capacitor
That’s what I thought, but when I’m undoing 50 years of “repairs” it never hurts to check. Thanksbridkarl — 04:03 PM
Value of capacitor
According to AI, "Yes, you're reading that correctly. A .005 capacitor typically refers to 0.005 microfarads (µF), ...HowardWoodard — 03:57 PM
Value of capacitor
I’m having to replace this audio coupling cap between the plate of a 6F6 and a phone jack. The parts list just says .005...bridkarl — 03:45 PM
Philco 50-295 antenna connections
Shoot, just realized that the blue wire connecting to the top of the tuning cap can't go to terminal D since that's on t...keith49vj3 — 01:20 PM
Philco 50-295 antenna connections
I forgot to mention that the IF and audio stages for AM work and FM plays great. Really confused by the antenna set up....keith49vj3 — 01:16 PM
Philco 50-295 antenna connections
All, I picked up a Philco 50-295 for a couple of dollars so I could demo sweep alignments for folks in my radio club.  T...keith49vj3 — 01:14 PM
Philco newbie with P-1891-WA console questions
Hi Jeffcon, First off, Welcome to the Philco Phorum!, a Phamily Phriendly Phorum, Phull of Phine Phriendly Pholks and ...MrFixr55 — 07:53 AM
462ron
+1 on what Morzh and Rod said, do the caps first. I only supplied the type and replacement numbers because in your first...462ron — 07:26 AM
Philco 370LZ chair side not a 71LZ
I came across this post and I just redid my 370. My Question is: Where does the toner rod go. This one was in a bag a...Villager61 — 08:36 PM

[-]
Who's Online
There are currently 1609 online users. [Complete List]
» 1 Member(s) | 1608 Guest(s)
Avatar

>