Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 8-Transistor portable
#1

Hi all,

I may bid on this radio shown in the photo below. As far as I can tell it's a model NT-807-BK. I can't find a lot in information about this set. Anyone out there with some idea of dates of production, where they were sold etc?

   
#2

It's a 1965 model (N = 1965 model year).

You can see a Christmas 1964 ad for this radio here:
https://commons.wikimedia.org/wiki/File:...46842).jpg

The 1965 models would have been introduced in summer 1964.

--
Ron Ramirez
Ferdinand IN
#3

Thank you Ron !!
#4

Hello john,
That is a really nice looking Philco !
that radio looks like a late 50s Sony that I am also thinking placing a bid on .

Sincerely Richard




Users browsing this thread:
[-]
Recent Posts
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM
Electrolytic restuffing/internals
Look here: Philco-F676-124 Vlad95 — 08:02 PM
PT-6 finished!!
Well the 35Z3 doesn't have a tap on the tube heater for a pilot light, so in this set they have the dial lamp paralleled...Arran — 06:21 PM
Electrolytic restuffing/internals
Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM
Another amp build - here I go again!
Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM
Electrolytic restuffing/internals
There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM

[-]
Who's Online
There are currently 361 online users. [Complete List]
» 1 Member(s) | 360 Guest(s)
Avatar

>