Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco Transitone Model C 1608
#1

Hi everyone,
 I have just taken delivery of an example of this set.When bought I did not even know who the maker was but I have made progress and now have the schematic and associated notes. But at this stage I have not been able to access a picture of this set. And mine is in a sorry state so I am keen to have a look at a picture to see what it should look like. Can anyone suggest where I should look online to see what a good or intact  C 1608  set  looks like?
Thanks everyone and cheers.
#2

Scroll down to 1939 and have a look, it's there.
Plymouth 1 - Identifying Car Radios (google.com)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#3

How great to have the Philco Phorum and such well informed people at the helm!I know now that my set is out of a Plymouth as its one remaining knob is brown.Thanks so much.
#4

Here's another pic of it from a '39 Desoto. It's part of the same family of autos. Dodge, Plymouth, Chrysler, and Desoto. I know a guy that is restoring a '39 Desoto but I'm not sure if it has a radio. I'll drop him a note and see what the story is.

http://www.2040-parts.com/1939-radio-chr...-i2221625/

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#5

I did check with my friend out in Colorado to find that his is a different set.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#6

Hi there Radioroslyn, Thank you for checking.And for the picture. Sadly my set,while internally it looks untouched, has suffered the ravages of the weather on the outside . I'm presuming the bottom button of the stack of station pre- select buttons is the one that disables the pre- select and re engages the  manual tuning system. Cheers and thanks. I'll post again when I have started work on it.
#7

I have one that I am recapping.I will try to post pictures.
#8

   
#9

Hi Keefer, Thanks for taking the time to post this picture. Yours is in tiptop condition compared to mine.So its great to see what a good one is like. Mine lacks the grille and has only one knob. Thanks for responding to such an old post Cheers,
#10

No problem.I recapped it and it works pretty good.If need anything else holler at me and i will try and help.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM

[-]
Who's Online
There are currently no members online.

>