Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Predicta Repairs Locally in So. Cal.?
#1

Hello,

I have the following TV's that all need some love....
Predicta Princess
Predicta Pedestal
Predicta Tandem
Sylvania Halolight

I have a great repair guy, but he can longer take in new jobs.
If anyone knows someone who does this work in the Southern California area....
I would love to know!

Thank you!

Matt Allyn
#2

Hello Matt. A lot of vintage techs have been hanging up their practices lately. You might want to try contacting the California Historical Radio Society to see if anyone locally can assist you. https://californiahistoricalradio.com
Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#3

Saddly, a lot of the techs knowledgable on these older sets are passing away, having health issues and simply aging. The youth doesn't have interest in this. Same with small engines. Those little shops that used to be every few blocks are long gone and a lot of the equipment went in the dumpster and the knowledge went to the grave. I've tried many times to get my son interested but he simply doesn't want to learn.  I went through a rebuild on his truck engine with him helping (not really by choice), and months later, he couldn't even remember how to check the oil! It's a different generation and I figure when I pass, also most of my things will also go to an auction or dumpster, my knowledge to the grave.

If I could find the place called "Somewhere", I could find "Anything" Icon_confused

Tim

Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
#4

Considerable TV data is stored on World Radio History.

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#5

I get that there seems to be less & less who are capable & knowledgeable to play with the vintage TV's. The gent who I have been working with for years is hanging up his schematics & just told me he wished he had someone to teach his craft to. I have a batch of vintage cars & taught my youngest how to pull, rebuild & install a drivetrain for one of them. He is now ALL IN on our vintage car collection. Not sure I can convince him of the vintage electronic game though.

Well...If anyone knows of someone to refer me to; that would be much appreciated.

Matt Allyn




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently no members online.

>