Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Small Silvertone Phonograph
#1

I have always thought these were neat and tried to get one off eBay several years ago. Sadly they always went kinda high. The ones I found around here were usually beat to death, missing lids, or partially crushed and in scrap hoppers due to their metal construction. Well, in an Amish antique shop of all things, I finally found a nice example![attachment=2][attachment=1][attachment=0]

Even the handle is in good shape and looks almost like new. It has a three tube amp inside and though needing some cleaning out, looks good inside. Shouldn't be expensive to redo. Recap job, new cartridge, maybe a little conditioning of the idler wheel. I just think these little guys are neat and it goes well with my 1948 Silvertone radio-phono-wire recorder console. Oh, gotta get the speaker reconed in that! Icon_problem

No matter where you go, there you are.
#2

A little update, the phonograph is now working! Had the caps and electrolytics replaced and the motor lubed up. The cartridge is fine, anyone know what these cartridges are in the Silvertone phongraphs of this era? I have a couple and my friend has had several and they never seem to die. They can't be magnetic can they? Only issue is they use the cursed 'permanent' stylus. So, when the stylus wears out you have to replace the whole shot. Only other issue is the spindle acts too large for several 78's. I've never run into that issue before with a 78 rpm phonograph. Might have to take some fine grit sandpaper and polish the spindle some more.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 434 online users. [Complete List]
» 1 Member(s) | 433 Guest(s)
Avatar

>