Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Phorum How-To #7: How Can I Change My Time Zone?
#1

First, go to your User CP. Now, click or tap Edit Options under Your Profile.

[Image: https://philcoradio.com/images/phorum/Ph...07_001.jpg]

Look for the Date and Time Options section:

[Image: https://philcoradio.com/images/phorum/Ph...07_003.jpg]

Under "Date and Time Options," look for the text which reads "If you live in a time zone which differs to what this board is set at, you can select it from the list below."

The default time setting for the Phorum is US Eastern Time which is GMT -5:00.

To change it to your local time zone:

Click or tap the drop-down box labeled "GMT -5:00 (current time)" with a time setting, as shown below:

[Image: https://philcoradio.com/images/phorum/Ph...07_004.jpg]

From this drop-down box, select or tap the time zone where you live.

Hint - GMT -5:00 = Eastern Time Zone.
GMT -6:00 = Central Time Zone.
GMT -7:00 = Mountain Time Zone.
GMT -8:00 = Pacific Time Zone.

For Phorum members living outside the USA, you should be able to figure out the proper settings here.



Other Time Settings

While you are here, you can also change a few other settings if you wish to do so.

Date Format

If the date format is not to your liking, click or tap the drop-down box and change it from the system default to whatever you wish.

[Image: https://philcoradio.com/images/phorum/Ph...07_005.jpg]

Time Format

If the time format is not to your liking, click or tap the drop-down box and change it from the system default to whatever you wish.

[Image: https://philcoradio.com/images/phorum/Ph...07_006.jpg]

Finally, you may choose whether you want the system to compensate for Daylight Saving Time or not:

[Image: https://philcoradio.com/images/phorum/Ph...07_007.jpg]

Select or tap the DST setting you prefer in this drop-down box.

When you are finished, click or tap the "Update Options" button...and your settings will be saved.
#2

Thanks, it worked
Joe

Joe Bratcher near Louisville, KY




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1799 online users. [Complete List]
» 1 Member(s) | 1798 Guest(s)
Avatar

>