Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

MORE Phonograph Woes
#1

Anyone know where I can go to find a needle cartridge for a 1946 Philco D-10A phonograph? FYI it is mounted in a Philco 46-1209.
#2

If that unit uses a Piezoelectric, Rochelle Salt, crystal cartridge, like my 76A/46-1201, then the cartridge may also be stone cold dead.
Regards
Arran
#3

West-Tech told me they were very hard to come by.....
#4

You would pretty much have to substitute it with a more modern cartridge, or rebuild the old one, unless it is one of those magnetic types. This is part of the hold up with my Bing Crosby, that and a wonky mercury switch.
Regards
Arran
#5

I have a 47-1230 D-10A phonograph with Dynamic cartridge. If it takes the same needle, which it sounds like it does, I contacted this ebay seller and he sold me this needle... http://www.ebay.com/itm/Vtg-NOS-Philco-D...0899675089 . He might have another if you want to contact him on ebay. Warren
#6

I clicked the link but was unable to pull it up.
#7

Hmm, lets try this one.. http://www.ebay.com/itm/271292984355?ssP..._262wt_880 This one should work... contact the seller, when I got mine the auction was ended but I contacted him and he said he had more than one and sold me one.
#8

Thanks, I'll give it a try!
#9

No Problem,, I would be interested in knowing how it works out. Icon_e_smile




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started repairing the chassis.. ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 776 online users. [Complete List]
» 2 Member(s) | 774 Guest(s)
AvatarAvatar

>