Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Antenna Insulator
#1

I found an antenna insulator in the beams under a floor in a house that was probably no older than the late 1930s. It's porcelain, glazed brown, marked Philco with three terminals, one for ground, one for antenna, one for "set". There is also a plastic-cased capacitor to bridge the antenna-set connection. The back is filled with "tar" or whatever you want to call that hard black fill material. Has anyone else seen one of these? I'll be happy to send photos to the group.

Damon
St. Louis, MO
#2

You most probably found a (partial) vintage tube type Radio "outdoor longwire antenna kit"! The porcelain insulators (usually 2 included, were to string uninsulated wire between points from house out to a tree, or another outdoor building strung horizonally high above ground level as possible). These type vintage antenna *kits*, come up for sale on eBay from time to time. The outdoor longwire antenna-kits were originally sold as many vintage radio brands of the 20s- late 1930s required them to be connected to the radios ant terminal to get reception. Many sets back in those days didnt have a factory balanced "built-in" factory loop antenna as the later sets of the 1940s-50s-60s tube type radio receivers. The *condenser* in tar in your kit, was to be used to keep the sometimes "excessive-lengths" ,... of stung outdoor antenna wire from *overloading* the chassis antenna input capacity! Some vintage radio sets required more outdoor antenna length than others ( rural farm areas,etc), depending on how far the listeners were from the Radio Station Transmitters during those days!!
Hence, if you lived in NYC back in 1920/30s era, with a fairly powerful AM station(s) a few miles away , the capacitor would come in handy indeed!! Otherwise, not using the added condenser in *tar* would allow some listener in the middle of farm land in Nebraska, to use the longwire antenna to hear NYC also at night!
And of course, outdoor longwire antennas were most definately required to receive Shortwave Bands reception on the many vintage tube radios sets of that era that offered a SW band listening also.You can also bet if it has the name Philco stamped on it, it is very high quality outdoor LW antenna insulator indeed!! Icon_wink Randal
#3

I think that this doo-lolly is a lightning arrestor from an antenna kit, as supplied with new sets by the manufacturer.

My father bought a new 37-650X Philco for Christmas, 1936, and a rather impressive antenna kit came with the set. The doublet antenna was there, with the twisted pair lead-in, and some knob-type insulators. There was such a lightning arrestor included in the kit. The one in ours was black porcelain, but the color of the finish had no meaning.

Thre is one of those kits in my garage now. I should look at it.




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently no members online.

>