Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-690
#1

Well I ended up getting this set the other day from a friend of mine. Front and sides of cabinet may be saved but the top needs refinishing. Behind front doors is very,very nice. Needs a couple resonators as these are missing the rear supports but I have extras I can use in it.

I think this will be sitting for quite a while before I can work on it.

 


Attached Files Image(s)
       
#2

Here's a pic of the rear...

Pretty clean overall.


Attached Files Image(s)
   
#3

Looks like a great acquisition.
#4

A great find. Well worth restoring. I just got mine back from a nice fellow who tuned mine up for me.
Wonderful high quality cabinet construction and veneers.
#5

Chassis is very clean.
#6

Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.
#7

(12-03-2014, 09:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky! I am GREEN with envy! Icon_mrgreen
#8

(12-05-2014, 02:45 AM)palegreenthumb Wrote:  
(12-03-2014, 09:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky!  I am GREEN with envy!   Icon_mrgreen

Thank you. I really like the 690 series.
#9

(12-05-2014, 11:06 PM)thirtiesradio Wrote:  
(12-05-2014, 02:45 AM)palegreenthumb Wrote:  
(12-03-2014, 09:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky!  I am GREEN with envy!   Icon_mrgreen

Thank you. I really like the 690 series.

Nice!  Looks suspiciously like the one the guy was selling when I bought the 37-116 Icon_think .  If it's the same one, it was buried behind a lot of things in his garage.  Must of been a bear getting it out.  Very heavy radio.

- Geoff
#10

(12-09-2014, 02:20 AM)Geoff Wrote:  Nice!  Looks suspiciously like the one the guy was selling when I bought the 37-116 Icon_think .  If it's the same one, it was buried behind a lot of things in his garage.  Must of been a bear getting it out.  Very heavy radio.

- Geoff

Yes, this is the same set Geoff. He said you had been out just before me to get your 37-116.

It took both of us to lift it through all the stuff in his garage and then we hand-trucked it the rest of the way. Had to leave it in the SUV overnight because of the rain. He didn't have this very long. I was just out there a few weeks back and bought the complete insides for a 37-690 in near mint condition and he said he bought this soon after.

I think we both got nice sets Icon_biggrin  
#11

Wow! I guess thats what friend are for. LOL . Good luck with your great new set!
#12

(12-09-2014, 09:55 AM)PhilcoJohn Wrote:  Wow! I guess thats what friend are for. LOL . Good luck with your great new set!

Your right about that Icon_biggrin  Thanks John




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2282 online users. [Complete List]
» 4 Member(s) | 2278 Guest(s)
AvatarAvatarAvatarAvatar

>