Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Break in? Fact or fiction?
#1

Do newly wrapped coils 'break in' or 'season' with age? I know it's a loaded question, but curious of others experiences.
#2

From the electrical point of view this is a bunch of hooey.....all these break-ins, be it cables, coils.....

Over time your bobbin could absorb moisture and stop being a good bobbin. But this is degradation and not a break in.

A well-made inductance will change a little if not at all over time. Inductance is dictated by geometry only. If you designed it so that your geometry is stable, so will be your inductor.
And even then......moisture is your main enemy. It is conductive and counters the inductance by the eddy currents appearing in the moisture mixed with chemicals.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

The basic answer?

No. There is no breakin period.

If you wrap a coil for "x" mh and you have done your job correctly, it will stay at that value until you change something about it.
#4

I can imagine very small effects.. A change in Q factor or self capacitance might result through the drying of varnish or laquer. Whether this would be noticable in anything but the most sensitive tests and applications, I doubt very much.

I don't hold with furniture that talks.




Users browsing this thread:
[-]
Recent Posts
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM

[-]
Who's Online
There are currently 2666 online users. [Complete List]
» 4 Member(s) | 2662 Guest(s)
AvatarAvatarAvatarAvatar

>