Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What year is this radio? Did I overlook it in the Philco library?
#1

                       
#2

Hi,

It is here:

https://philcoradio.com/gallery2/1936b/#Model_84B

It is a mid-season 1936 model (introduced January 1936).

--
Ron Ramirez
Ferdinand IN
#3

Thank you! My parents bought it on an installment plan and paid it out. $20!
JH
#4

Jhammer,
That is a nice looking radio cabinet style !

Sincerely Richard
#5

Thx for your help!!
#6

A later version of the 80Jr. 4 tube Superhet that uses a regenerative detector but sounds amazingly good considering the bare bones circuit. The original 80 Jr sold for $14.95 with tubes in 1933! The 37-84 uses 6J7 Pentodes as the Autodyne 1st Detector and regenerative 2nd detector instead of the 36, and a 6F6 (the octal descendent of the 42) as a power amplifier. A 5Y4 replaces the 80. These sets were marked as a loss leader to get people into the showroom on a bargain for the sales rep to "upsell" the Customer to the better models. Another piece of history, and this being a deceased relative makes it even more special!!

BTW, when you find the correct sw / volume control knob, save that zenith one, they go for about $24.00 a pop on eBuy.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55
#7

Hi JH and Welcome,

> My parents bought it on an installment plan and paid it out. $20!
 
I read an ad that described for the easy payment plan of $2 down and $2 a week this set can be yours. So in about 2 months & 2 weeks it was all yours.

If you wanted to fix it up a bit the dial  https://www.radiodaze.com/philco-37-84-3...m-ds-a318/ (Match pn with old one. There are two different ones.) and knob http://www.renovatedradios.com/product.php?product=20 are available as reproduction parts. It would have had a cloth covered power cord w/one of those old school round flattish plugs on the end. By now the original has about perished. Number 17 would a good match for the grille cloth if you wanted to replace it https://www.radiogrillecloth.com/products

If you need help getting it going there are a number of guys here that can help you out. I'm pretty familiar w/it as I have 5 or 6 of um.[Image: https://philcoradio.com/phorum/images/sm...n_wave.gif]

These are merely suggestions I understand that there may be some reasons to leave it in it's original condition. Just wanted to make you aware that there are some parts that being reproduced for that set.

GL and have fun w/your new project

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Hi JHammer,

I have one of those power plugs that Terry mentioned and it seems to be in good condition. I'll let you have it for the cost of shipping if we can figure out how to do that. Here's a photo.
   
#9

Thanks but I’m not restoring it.




Users browsing this thread:
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>