Philco 118H Cabinet, Question for Ron
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
I have a Philco 118H that needs some TLC. The cabinet veneer appears to be OK, just needing cleaning and condition.
My question to Ron, keeper of the Philco Furniture History book...
The legs on mine have a few pieces that came off the legs. The veneer on the stringers as well is peeling and missing from dampness it was exposed to.
What wood are the legs made from?
What is the cabinet finish/toner color used?
What was the veneer on the stringers?
Posted here rather than a PM so others, including "glennpr" can benefit.
Thanks in advance.
Mike
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
(This post was last modified: 04-27-2012, 12:18 PM by PhilcoMike.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
At work so will have to answer the wood type later...
"a few pieces that can off the legs"? I think you mean came off the legs?
As I recall from the one I had previously (which glennpr now owns) along with one or two others I have seen, I think Perfect Brown would be good for the cabinet overall - something a bit darker than Medium Walnut, but not a lot darker; and it needs to be an "Ultra Classic" product so you don't lose the woodgrain. The front panel originally had a "sunburst" look with the majority being Medium Walnut, with Perfect Brown around the edges. Just take a look at any of the radios being sold by Arran's favorite eBay seller "Foggy", and you will see what I mean - only this effect is on the front panel alone, not on the edges of the cabinet.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
(04-26-2012, 11:52 AM)Ron Ramirez Wrote: At work so will have to answer the wood type later...
"a few pieces that can off the legs"? I think you mean came off the legs?
As I recall from the one I had previously (which glennpr now owns) along with one or two others I have seen, I think Perfect Brown would be good for the cabinet overall - something a bit darker than Medium Walnut, but not a lot darker; and it needs to be an "Ultra Classic" product so you don't lose the woodgrain. The front panel originally had a "sunburst" look with the majority being Medium Walnut, with Perfect Brown around the edges. Just take a look at any of the radios being sold by Arran's favorite eBay seller "Foggy", and you will see what I mean - only this effect is on the front panel alone, not on the edges of the cabinet.
I attached these again. If you need any additional pictures just let me know.
Glenn
http://s1230.photobucket.com/albums/ee48...18left.jpg
http://s1230.photobucket.com/albums/ee48...18full.jpg
http://s1230.photobucket.com/albums/ee48...8front.jpg
Happily back in Illinois..not.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
Here are Glenn's photos.
[Image: http://i1230.photobucket.com/albums/ee48...18left.jpg]
[Image: http://i1230.photobucket.com/albums/ee48...18full.jpg]
[Image: http://i1230.photobucket.com/albums/ee48...8front.jpg]
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
(04-27-2012, 05:38 AM)Ron Ramirez Wrote: OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
Thanks for posting those...I tried but gave up. Seeing these pictures has me re-motivated to finish the shadowmeter coil winding and get the chassis back together and in this cabinet.
Glenn
Happily back in Illinois..not.
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
(04-27-2012, 06:17 AM)glennpr Wrote: (04-27-2012, 05:38 AM)Ron Ramirez Wrote: OK, I have the book in front of me - and, unfortunately, it does not mention the types of wood used.
Looking back, I see Furniture History stops mentioning the types of wood/veneer used after early 1933. Sorry.
The veneer on the top and sides will be some sort of walnut. Exactly what type, quarter-sawn, half-sawn, full-sawn, sawn-shawn, I don't know.
I think I misspoke when I described the toners. It looks like it uses either Maison Brown (Ultra Classic) or Extra Dark Walnut (Tone Finish) on the trim pieces and possibly the legs, with Perfect Brown (Ultra Classic) overall otherwise. I think these tended to be a little bit darker overall than sets using Medium Walnut.
Thanks for posting those...I tried but gave up. Seeing these pictures has me re-motivated to finish the shadowmeter coil winding and get the chassis back together and in this cabinet.
Glenn
Thanks Ron, Glenn,
You two are my Philco 118H Heros!!!
Mike
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| RodB
:beerchug:Vlad95 — 10:22 AM |
|
Philco 42-345 Restoration/Repair
|
| Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM |
|
5U4 vs 5Z4 tubes
|
| Well this is a Hallicrafters SX/9 circa 1936.
No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM |
|
5U4 vs 5Z4 tubes
|
| The pinout is the same but the 5U4 has a 3 amp filament, verses 2 amps or less on the 5Z4. I think that the pinout of a ...Arran — 12:04 AM |
|
Philco 42-345 Restoration/Repair
|
| By the way.
osanders0311
Take a look here: Dial cord stringing Guides
May be here you can fount correct string settin...Vlad95 — 11:15 PM |
|
5U4 vs 5Z4 tubes
|
| 5U4 and 5Z4 almost identical. I think nothing happened if you left 5U4 instedad 5Z4 long time.
Just heater current 5U4 ...Vlad95 — 11:02 PM |
|
Philco 42-345 Restoration/Repair
|
| Hello Vlad95 ,
Very Funny !
Sincerely Richardradiorich — 11:01 PM |
|
Philco 42-345 Restoration/Repair
|
| RodB
You are European yourself :evil:
I'm Canadian for the last 30 years :snowman:
But not Yankee :lol: Vlad95 — 10:49 PM |
|
Philco 42-345 Restoration/Repair
|
| The band switch selects different oscillator coils for the band selected. I would look for a bad connection in the switc...RodB — 10:31 PM |
|
Philco 42-345 Restoration/Repair
|
| Hang in there...PaulPaul Philco322 — 09:30 PM |
|
Who's Online
|
There are currently 1014 online users. [Complete List]
» 2 Member(s) | 1012 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
