Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My 60L before and after.
#1

My Philco 60L returned home tonight. I had it given to me a while back and gave it to a friend for a while. Well, he decided to give it back to me and he started work on it before I got the whammy electric bill and work cut me to two days this week. Anyways, I mostly traded for the repairs which included recapping the unit, replacing the grill cloth with a presentable one off a 50's console that was junked out, finding a usable speaker, rewinding two of the coils, and replacing the knobs and the number 75 tube which decided to die right after the radio was repaired. Also the missing escutcheon was found jammed in front of the chassis.

Here is before:

   

And now:

   

No matter where you go, there you are.
#2

I swapped out the 60L with the Atwater-Kent in my bedroom this morning. Definitely a better little console more suited to the smaller room. Performs quite well for a five tube radio.

No matter where you go, there you are.
#3

The little 60 is a pretty good player. I've got one in a BG cabinet and a 66 in a moderne cabinet. The 60 as been working years and years. The 66 the cabinet is a mess and haven't had a chance to have a look at chassis. The 60 and 66 are kinda same but the 66 has much better SW coverage.
Terry
#4

I should try and track donw a 60 Baby Grand to go with my console now! Icon_biggrin Once I get some money back ahead. I'll have to look up the 66 and see what it looks like. I know I've been playing the heck out of my 60L since I got it home last night and am tracking down some spare tubes out of my stash just in case one decides it has had enough. Icon_smile

No matter where you go, there you are.
#5

Very nice Icon_thumbup I noticed your escutcheon and knobs are a different (earlier?) style than mine. Your cabinet looks to have higher quality veneer too.

[Image: http://farm4.staticflickr.com/3104/57171...13e9_z.jpg]
#6

Really neat, Jayce! Icon_thumbup

Bob, the 60L remained in production through the 1935 season, so since yours has the bakelite escutcheon and hex knobs, it was produced during the '35 season but after the switch from a brass escutcheon to bakelite. And it's the small escutcheon, so it was probably produced sometime between the summer of '34 and the end of December '34.

--
Ron Ramirez
Ferdinand IN
#7

The friend who repaired mine said he saw a stamp on the chassis or original speaker that said '1934'. If that is true mine was probably produced early that year. It's just nice to have it back together again and I do still have the original speaker with hopes of having it reconed someday. It was ripped to shreds.

No matter where you go, there you are.
#8

I posted the before and after pictures of this radio on my Facebook page and today I have had coworkers stop me to compliment the radio and my friend's work on it. The 60L has become my daily driver console in my bedroom. The entire family here in the house seems to really like it. Icon_smile

No matter where you go, there you are.
#9

It is always super when they turn out swell, enjoy it. Hope it brightens things up for the rest of the winter.

Paul

Tubetalk1




Users browsing this thread:
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently 1259 online users. [Complete List]
» 1 Member(s) | 1258 Guest(s)
Avatar

>