Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Unidentified Philco Radio/Record Player
#1

Recently purchased two radio/record players from a flea market one of which says Philco on the front and has a tag inside that says the radio is a philco model 740.

I've been unable to find any information on this radio and was hoping that someone here might be able to help me out.

Here's a picture of the radio in question: [Image: http://s7.postimg.org/c99ah2qd3/Philco_pic.jpg]

Any help would be greatly appreciated.

Thank you
#2

I'd take a guess and say that it is from the late 1940's to the early 1950's. Like 1948-51.
Terry
#3

You probably can't find anything because a Model 740 is a Canadian model number. Your best bet for finding that would be to find someone with a set of Radio College of Canada manuals if you want a schematic, though there maybe someone out there who has the Canadian Philco factory service data. It is from between 1948 and maybe 1952 by the looks of things, that being said radio phono consoles from that era don't tend to have much collectable appeal, if that was something you wanted to know.
Regards
Arran
#4

Hi Machinefaction,

I took a stab at searching through the Radiomuseum.org website and found what looks like your model:
http://www.radiomuseum.org/r/philco_49_1600.html

There's no photo shown, just a factory drawing. But it has most of the characteristics of your case and grille cloth placement.
A similar model (with a different case) from the same year shows a pretty accurate match to your knobs and dial glass:
http://www.radiomuseum.org/r/philco_49_1605.html

I would bet yours is a Philco 49-1600. But I'm sure there are older (and wiser) folk here on the forum who can confirm this!

Hope that helps!

Michael (mbhdesign)

mbhdesign
Michael Hennessey




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently no members online.

>