Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

124A/ B interstage Hammond xfmrs
#1

Has anyone tried those in any radio using pushpull interstage which needs 4:1 ratio? These have 3:1.
I wonder if it resuls in some loss of power. Also size is smaller.

Had using it result in any negative effects?

Radios like 20, 111, possibly 95, 87.
#2

I used 124E in my sparton 1466 worked as good as the original.
#3

Mike, upon recommendation I too used a 124E on my Fada with P-P 45s. Worked dandy.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#4

I too consider them as the modern 'go to' option.
#5

OK ood to know, it too is 1:3 turn ratio (1:9) impedance.
Q1: Is there real advantage over A and B otions? "A" is 27 bucks vs "E" being 45 bucks.

Q2: is there some loss of power due to 1/4 of driving voltage loss? Or does it matter conidering it is a radio?
#6

Q1 for a am radio I doubt you would notice the difference.

Q2 If the radio has a lot of audio gain probably won't notice it if it doesn't it may lack volume on weak stations.




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently no members online.

>