Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model #?
#1

Local radio but cant find model #

http://longisland.craigslist.org/atq/4415689836.html

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

42-390x perhaps?

http://www.philcoradio.com/gallery/1942a.htm#v
#3

Thats her I think.
thanks eX

Does anyone know how good of a performer this radio is?

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Nothing terribly special except that it has the old FM band.
#5

I'd think the 42-390 would be a decent performer. I have a 42-355 with the same chassis. I pick up all kinds of distant stations on AM and SW even in my basement with just the built-in loop. The chassis is a devil to restore, though, because it has lots of crumbling rubber-insulated wire. There is also an enormous assembly combining the band switch, push-buttons, and power switch that is hard to re-wire.

The old FM band is useless, of course, though I can often pick up a strong local country station, probably from a harmonic in the converter stage. I didn't bother to align the FM on mine.

Restoration isn't really worse than any of the similar Philcos of the era with rubber wires, but it takes patience. It was actually one of the first few radios I restored. It took me a long time, but it didn't require any special skill or experience. If the band switch assembly is damaged or worn out, I don't know what you'd do.

John Honeycutt




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 428 online users. [Complete List]
» 1 Member(s) | 427 Guest(s)
Avatar

>