Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Well, I have finally gone and done it! I bought one of those big, solid state, stereo consoles I always tried to avoid! From what I can tell, this is a 1969 model. Everything works except the phonograph, which sorta works. Only thing I haven't tested is the hookups on the back for the aux/tape connectors and external speakers. Oddly, it doesn't do anything with the speaker select knob on 'both'. Maybe it needs the external speakers to complete the circuit for that? Definitely sounds good.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Neat! 
If it says "RCA Victor" and has the Nipper logo, it is pre-1968. RCA changed to that ugly new logo in 1968 and dropped the "Victor" from its electronics products, as well as the "His Master's Voice" logo.
I remember as a kid, back in 1968, when I had the chance to look at console stereos, I would do so...and at the age of 8, I could tell older stock from brand new models - the older stock still said "RCA Victor" inside. The new models had that ugly RCA logo, no "Victor." By then I was rather fascinated with the "His Master's Voice" logo. Funny thing, as I grew up, I lost interest in His Master's Voice, Nipper and RCA Victor...maybe because, in my view, RCA dropped everything about their products that was "cool" to me (remember, I was only eight years old when the change was made by RCA).
--
Ron Ramirez
Ferdinand IN
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, I wonder what year this unit is then? It does say RCA-Victor right on the dial bezel and still has the little Nipper Logo over the RCA logo on the bezel and (worthless) 45 spindle. Yeah, gotta do something about that part.
No matter where you go, there you are.
Posts: 4,894
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
If you can't find a reference for the model there should be a EIA date code on some of the parts inside, such as the filter can cap.
Regards
Arran
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
So far all the references I can find on this model, including old newspaper ads, date this as a 1968-1969 model. I'd post one of the ads here, but all the sites demand you have premium memberships to actually see and copy the full size pages. Harrrumph! 
No matter where you go, there you are.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
It's in Sam's 981-6. If you have access to that you can get an idea on the manufacturing date.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks, Brenda. I'll have to see how far up my friend's manuals go. I am supposed to be visiting him over the weekend.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Could be also, that RCA produced some 1968 models with the old logo (maybe leftover 1967 tooling?) before switching over 100% to that "new" logo and dropping "Victor" from the brand name?
--
Ron Ramirez
Ferdinand IN
Users browsing this thread:
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| morzh
Short-circuited turns can be considered as a half-dead transformer.
But on this case transformer will hot and s...Vlad95 — 11:01 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM |
|
Who's Online
|
There are currently 2274 online users. [Complete List]
» 4 Member(s) | 2270 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
