Philco 81 B Dial replacement
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
BIG Question,,,I have a Philco 81B,,,which has the Police Band...On thee Dial,,does it show the 2nd Band,like a Philco 620, or any other radio that has multi bands on it…Because , My doesn't have it,,,BUT I do have the switch for it,, just need a- alignment for it..---Thanks You all….
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
--
Ron Ramirez
Ferdinand IN
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Thank You,,Ron,,,,I don't have that on the scale,,,now know what to look for,,,Maybe I can find one New some were,,,will look for one,,, Cheers
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
I did notice that one of are suppliers replacement dials lists the 80 and 81 using the same dial. I too have an 81 with an 80 dial on it.
Terry
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Well,,,,Mark Oppat says that he does NOT have thee dial with the S.W. numbers under the scale,---he has 27-5009 and B-7989 ,,and Radio Daze only has B-7989,,,soo,,,I must have B-7989 ---ALSO (my mistake on number before) ,,, So I presume that the one ,,,that I would need would be the B-7889,,,which I can not find,,,
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
PT 6 chassis screws size???
|
| Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Who's Online
|
There are currently 953 online users. [Complete List]
» 2 Member(s) | 951 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")