Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi all
Does anyone have any info on the operation of the disk recording on the 41-42 Philco sets with the recording unit.  What I want is operation instrucion of the unit not the tech part. 
Joe
Joe Bratcher near Louisville, KY
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Morning Joe,
I just may have that info. Will get back to you.
Have to dig in the "lesser used" section archive.
:-)
Chuck
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
chuck has it
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Well sorry Guys, thought I did.
I only have the paper on the parts listing and not the Owners Instructions
for the Home recording option, HR-1. Ask in the general section here on The Phorum.
Still, someone may have this info. And, if so, I will contact them and add it to my archive if it pops up.
:-)
Chuck
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Thanks for looking Chuck, I guess that is a rare item.
Joe
Joe Bratcher near Louisville, KY
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
WOOHOO I have something RARE 
is it worth a lot
41-608 BOL
1) installing instructions
2) installing and operating
3) instruction for operating
ahh I`ll never be rich any way
chuck I`ll resend them
joe send me your email or you can order them from chuck
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Way to go Sam, you are o k don't care what they say.  Let me know what I owe you.
My email is w4rtc@yahoo.com
Thanks
Joe
Joe Bratcher near Louisville, KY
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
joe
check your email
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hey Hey Sam, thanks for this info it is just what I wanted.  . Mark up another one for the Phorum 
Thanks a lot.
Joe
Joe Bratcher near Louisville, KY
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Hey joe
Did you try to make a recording ?
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
HI Sam
No I have to get the recording head rebuilt I used the info you sent to set up the feed gear. I am not sure when I can get the funds to get the head rebuilt. It is expensive. Many thanks for the info.
Joe
Joe Bratcher near Louisville, KY
Posts: 110
Threads: 26
Joined: Nov 2005
City: Wilmington
State, Province, Country: NC
(04-10-2016, 05:26 PM)sam Wrote: WOOHOO I have something RARE 
is it worth a lot 
41-608 BOL
1) installing instructions
2) installing and operating
3) instruction for operating
ahh I`ll never be rich any way
chuck I`ll resend them
joe send me your email or you can order them from chuck
sam
I too would like a copy of the Recording instructions. If still available
Bob T
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hey bob
sent to your email will be from mafiamen2
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 110
Threads: 26
Joined: Nov 2005
City: Wilmington
State, Province, Country: NC
(06-23-2016, 01:38 PM)sam Wrote: hey bob
sent to your email will be from mafiamen2
Thanks Sam
Got all of it. Appreciate the help
Bob T
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
Philco model 38 code 121 not receiving signal.
|
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
Philco model 38 code 121 not receiving signal.
|
I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
Philco model 38 code 121 not receiving signal.
|
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
PT 6 chassis screws size???
|
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
Philco model 38 code 121 not receiving signal.
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
Philco model 38 code 121 not receiving signal.
|
Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
PT 6 chassis screws size???
|
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
PT 6 chassis screws size???
|
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Who's Online
|
There are currently 853 online users. [Complete List] » 1 Member(s) | 852 Guest(s)
|
|
|

|