Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Recording
#1

Hi all
Does anyone have any info on the operation of the disk recording on the 41-42 Philco sets with the recording unit.   Icon_think  What I want is operation instrucion of the unit not the tech part.   Icon_biggrin
Joe

Joe Bratcher near Louisville, KY
#2

Morning Joe,

I just may have that info.  Will get back to you.

Have to dig in the "lesser used" section archive.

:-)

Chuck
 
#3

chuck   has it Icon_e_wink

sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#4

Well sorry Guys, thought I did.  

I only have the paper on the parts listing and not the Owners Instructions 
for the Home recording option, HR-1.  Ask in the general section here on The Phorum.

Still, someone may have this info.  And, if so, I will contact them and add it to my archive if it pops up.

:-)

Chuck
#5

Thanks for looking Chuck, I guess that is a rare item.
Joe

Joe Bratcher near Louisville, KY
#6

WOOHOO I have something RARE Icon_eek
is it worth a lot Icon_think


41-608  BOL

1) installing  instructions
2) installing and operating
3) instruction for operating


ahh I`ll never be rich any way

chuck I`ll resend them
joe send me your email  or you can order them from chuck


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#7

Way to go Sam, you are o k don't care what they say. Icon_smile Let me know what I owe you.
My email is w4rtc@yahoo.com
Thanks
Joe

Joe Bratcher near Louisville, KY
#8

joe
check your email

sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#9

Hey Hey Sam, thanks for this info it is just what I wanted. Icon_thumbup Icon_thumbup Icon_thumbup . Mark up another one for the Phorum Icon_clap
Thanks a lot.
Joe

Joe Bratcher near Louisville, KY
#10

Hey joe
Did you try to make a recording ?

Sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#11

HI Sam
No I have to get the recording head rebuilt I used the info you sent to set up the feed gear. I am not sure when I can get the funds to get the head rebuilt. It is expensive. Many thanks for the info.
Joe

Joe Bratcher near Louisville, KY
#12

(04-10-2016, 05:26 PM)sam Wrote:  WOOHOO I have something RARE Icon_eek
is it worth a lot Icon_think


41-608  BOL

1) installing  instructions
2) installing and operating
3) instruction for operating


ahh I`ll never be rich any way

chuck I`ll resend them
joe send me your email  or you can order them from chuck


sam

I too would like a copy of the Recording instructions. If still available

Bob T
#13

hey bob
sent to your email will be from mafiamen2

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#14

(06-23-2016, 01:38 PM)sam Wrote:  hey bob
sent to your email will be from mafiamen2

Thanks Sam

Got all of it.  Appreciate the help

Bob T




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 834 online users. [Complete List]
» 2 Member(s) | 832 Guest(s)
AvatarAvatar

>