Posts: 1
Threads: 1
Joined: May 2016
City: ATHENS OH
I have recently acquired a Philco Lowboy 45. The cabinet is in good shape, but the only thing left inside is the speaker. I tested it, it's not blown but is just really quiet. I'd just like to know more about the parameters of the speaker (power handling, impedance, etc). If anyone has anything, that'd be great. Thanks.
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum!
Ron has collected and posted (see the speakers.zip file) speaker information, unfortunately unless I missed it I only see the 5" speaker for the 45C model, not your 45L. Perhaps someone will have the info.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
It is most likely that your speaker is "quiet" because the field coil is not being charged. The old speakers did not use a permanent magnet. So without the radio to supply power it has no magnet.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Before we go on a wild goose chase why don't you tell us HOW exactly you tested it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The 45L speaker is K-22, which is in the speaker index - only the 45L is not listed as using it.
Good catch, Bob. I'll have to correct that after K-town.
--
Ron Ramirez
Ferdinand IN
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
May NOT be the speaker,,could be capacitors,,resistors,,,if have not be replaced,,check tubes,,etc,,
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Ken
He kinda said there is only speaker in there. Implies no chassis, inferring no capacitors, resistors or tubes. Unless I am missing something
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Apparently,,,I missed that ALSO-------SORRY
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 38 code 121 not receiving signal.
|
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
Philco model 38 code 121 not receiving signal.
|
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
Philco model 38 code 121 not receiving signal.
|
I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
Philco model 38 code 121 not receiving signal.
|
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
PT 6 chassis screws size???
|
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
Philco model 38 code 121 not receiving signal.
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
Philco model 38 code 121 not receiving signal.
|
Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
PT 6 chassis screws size???
|
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
PT 6 chassis screws size???
|
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Who's Online
|
There are currently 860 online users. [Complete List] » 1 Member(s) | 859 Guest(s)
|
|
|

|