Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Where does
#1

the 41-300 fit into the 1941 lineup of sets? Short of having a bol and a mystery control is it the top of line? I really like the curvy speaker grille.

Terry


Attached Files Image(s)
   
#2

well I don`t like it   too darn heavy Icon_e_wink

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Speakin' from experience, eh?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

I think that is a spectacular design and would love to add one to my collection. I am sure it is a lite weight compared to some of the 20's consoles I have.

Gregb
#5

+1
I find a lot of the 20's consoles quite plain or really gawady but all weigh a ton.

Terry
#6

Thats really nice!
I am betting by the call station tabs that is is from the Washington area Icon_wink

It looks much better in the light of day then in my den hidden..
Next is to come and get your house organized Icon_smile

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Terry

In the initial 1941 Philco model year lineup, the 41-300 is second from the top of the line 41-316 which has wireless remote control. The 300 has more tubes in the audio section, though, making it (arguably) the better radio overall.

You don't know how tempted I was to sneak that big honkin' set into my Excursion! Icon_wink But it was already pretty well packed...plus I'm trying to cut back on big consoles around here, not add more...

--
Ron Ramirez
Ferdinand IN
#8

if I known you liked it I would had fit it in their Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#9

(05-16-2016, 09:08 AM)Ron Ramirez Wrote:  Terry

In the initial 1941 Philco model year lineup, the 41-300 is second from the top of the line 41-316 which has wireless remote control. The 300 has more tubes in the audio section, though, making it (arguably) the better radio overall.

You don't know how tempted I was to sneak that big honkin' set into my Excursion! Icon_wink But it was already pretty well packed...plus I'm trying to cut back on big consoles around here, not add more...
> how tempted I was to sneak
That's like trying to sneak out of a car dealership with an Excursion under your overcoat. [Image: http://philcoradio.com/phorum/images/smi...prised.gif]It's a hard set to hide. I felt a little bad cause I knew you where sort of looking for one but Kirk and I had been trying to get this down to me since last fall. Sam was giving me the evil eye [Image: http://philcoradio.com/phorum/images/smi...wisted.gif]because I had forgotten that it was coming us back here along with a fair amount other big and or heavy stuff that didn't sell. Heard you did pretty good with the pushbutton set at the end of the table.[Image: http://philcoradio.com/phorum/images/smi...humbup.gif]

Terry
#10

(05-16-2016, 12:09 PM)Radioroslyn Wrote:  > how tempted I was to sneak
That's like trying to sneak out of a car dealership with an Excursion under your overcoat.

Icon_lol Good one! Icon_lol Icon_thumbup

Quote:I felt a little bad cause I knew you where sort of looking for one but Kirk and I had been trying to get this down to me since last fall.

Oh, H**l, don't feel bad, Terry. Icon_smile I do admire those big 1941 Philcos but I have to limit myself, console-wise, these days.

Quote:Heard you did pretty good with the pushbutton set at the end of the table.[Image: http://philcoradio.com/phorum/images/smi...humbup.gif]

At first I didn't know what you were referring to...what pushbutton set?...and then it dawned on me what you meant. Thank you, Terry...you helped make it happen! Icon_thumbup

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 860 online users. [Complete List]
» 1 Member(s) | 859 Guest(s)
Avatar

>