Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Guys I was just wondering what your most played Philco Radio might be. As for me it would have to be between my 38-116 console and my 37-610 tombstone radios. I can not believe the respose of the 37-610 is for being a 5 tube radio. It pulls in stations from all over. Lets post what our go to and most listened to Philco radios are!
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
37-116. For now.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 83
Threads: 7
Joined: Dec 2015
City: Plattsmouth, NE
I don't have my 37-665B back from restoration but I look forward to the "Philco Sound" in my den next weekend.
Posts: 1,889
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
37-116 for me - an amazing player.
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Go to would be my 42 345, good sound, fairly sensitive. Not too big to move around.
Paul
Tubetalk1
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
41-280 console. Has a nice sound to it with short antenna wire in basement.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
My 38 690 in our dining room. We play it several times a week for the last 5 years. Terrific sound and best on holidays when I use the transmitter to pipe holiday music to it.
A 38 116 upstairs when working up there and a 116 shouldered tombstone in my office, but that needs repair as it just stopped working.
Posts: 98
Threads: 2
Joined: Jul 2014
City: Eugene, OR
My 40-160 is my daily driver. It was the first radio I did (rubber wire and all) so I have a fondness for it.
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yeah it's like a sick puppy you nursed back to health.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 871
Threads: 50
Joined: Feb 2013
City: Shenandoah,
State, Province, Country: Pennsylvania
Like my 41-250 log cabin. I am very impressed with the reception. I have a 37-116 done except for the cabinet but my 41-250 is more sensitive and less noise and interference than the 37-116!
Bendix 0626. RCA 8BX5. RCA T64
Philco 41-250. Philco49-500
GE 201. Philco 39-25
Motorola 61X13. Philco 46-42 Crosley 52TQ
Philco 37-116. Philco 70
AK 35 Philco 46-350
Philco 620B. Zenith Transoceanic B-600
Philco 60B. Majestic 50
Philco 52-944. AK 84
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
It would have to be my 40-185xf console downstairs and upstairs a toss up between my 37-670 and my 1936 610 bullet.
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
47-1230, I suppose will always be a favorite for me for two reasons...because it was the first radio I restored and refinished and even got the record player working of which parts are pretty much non existant plus it was my fathers which he bought new in 1947. Pretty sentimental to me.
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Have a 620,,laying on it side (chassis only) on my work bench,,which I listen to ,,when down there,,,upstairs,,have 46-1226,,,RCA 95t,,Zenith 6C05Z,, and the list goes on,,just LIKE you guys,,,Cheers
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Pre WWII I'll go to my 37-630. Post WWII, I'll go to my 47-1230.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
The same 48-482 that is my avatar. It was one of my first restorations and sits on a shelf in my shop and is listened to daily.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT 6 chassis screws size???
|
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
PT 6 chassis screws size???
|
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
Philco model 38 code 121 not receiving signal.
|
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
Philco model 38 code 121 not receiving signal.
|
Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
Philco 42-345 Restoration/Repair
|
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
Philco 42-345 Restoration/Repair
|
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
Philco model 38 code 121 not receiving signal.
|
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
Testing a speaker and output transformer Trutone A2-G
|
The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
Testing a speaker and output transformer Trutone A2-G
|
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
Philco model 38 code 121 not receiving signal.
|
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
Who's Online
|
There are currently 709 online users. [Complete List] » 2 Member(s) | 707 Guest(s)
|
|
|

|