Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Your go to Philco Radio
#1

Guys I was just wondering what your most played Philco Radio might be. As for me it would have to be between my 38-116 console and my 37-610 tombstone radios. I can not believe the respose of the 37-610 is for being a 5 tube radio. It pulls in stations from all over. Lets post what our go to and most listened to Philco radios are! Icon_thumbup
#2

37-116. For now.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

I don't have my 37-665B back from restoration but I look forward to the "Philco Sound" in my den next weekend.
#4

37-116 for me - an amazing player.
#5

Go to would be my 42 345, good sound, fairly sensitive. Not too big to move around.

Paul

Tubetalk1
#6

 41-280 console. Has a nice sound to it with short antenna wire in basement.
#7

My 38 690 in our dining room.  We play it several times a week for the last 5 years.  Terrific sound and best on holidays when I use the transmitter to pipe holiday music to it.

 A 38 116 upstairs when working up there and a 116 shouldered tombstone in my office, but that needs repair as it just stopped working.
#8

My 40-160 is my daily driver. It was the first radio I did (rubber wire and all) so I have a fondness for it.
#9

Yeah it's like a sick puppy you nursed back to health. Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

Like my 41-250 log cabin. I am very impressed with the reception. I have a 37-116 done except for the cabinet but my 41-250 is more sensitive and less noise and interference than the 37-116!

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84
#11

It would have to be my 40-185xf console downstairs and upstairs a toss up between my 37-670 and my 1936 610 bullet.
Icon_angel
#12

47-1230,  I suppose will always be a favorite for me for two reasons...because it was the first radio I restored and refinished and even got the record player working of which parts are pretty much non existant plus it was my fathers which he bought new in 1947. Pretty sentimental to me.
#13

Have a 620,,laying on it side (chassis only) on my work bench,,which I listen to ,,when down there,,,upstairs,,have 46-1226,,,RCA 95t,,Zenith 6C05Z,, and the list goes on,,just LIKE you guys,,,Cheers
#14

Pre WWII I'll go to my 37-630. Post WWII, I'll go to my 47-1230.
#15

The same 48-482 that is my avatar. It was one of my first restorations and sits on a shelf in my shop and is listened to daily.

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org





Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 848 online users. [Complete List]
» 2 Member(s) | 846 Guest(s)
AvatarAvatar

>