Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Model 118 Finished
#1

After two years my 118 is done. Came out pretty good. Original grille cloth. It plays very nicely. Someone had modified  the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
[Image: http://i614.photobucket.com/albums/tt228...bd9f54.jpg]

Steve Chambers
#2

I see only one image - it looks like maybe there were others?

But whatever - I can see you did a beautiful job! Icon_thumbup Icon_thumbup
#3

Beautiful job! I have one of those around here somewhere to get to some day. Hope there's no faux finish on it anywhere. Ed
#4

Thanks!

All real wood on this one.

Steve Chambers
#5

(06-12-2016, 03:45 PM)Nathan Slingerland Wrote:  I see only one image - it looks like maybe there were others?

But whatever - I can see you did a beautiful job!  Icon_thumbup  Icon_thumbup

Only one. I don't know how that other stuff got in there or how to remove it. 
#6

  Great job. Icon_thumbup Icon_thumbup
#7

Icon_thumbup  Congratulations ! It looks great.
#8

That turned out beautiful   Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#9

I took care of those two extra "broken" image icons for you Steve. Nice job!!!!!
Icon_clap Icon_clap Icon_clap
#10

(06-14-2016, 04:36 PM)klondike98 Wrote:  I took care of those two extra "broken" image icons for you Steve.  Nice job!!!!!  
 Icon_clap  Icon_clap  Icon_clap

Thanks! Icon_biggrin
#11

...I still only see one image...

But hey, Steve, congratulations on a great job! Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#12
Smile 

(06-12-2016, 03:37 PM)Steve Chambers Wrote:  Someone had modified  the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.

I've been guilty of doing that,  Icon_mrgreen   but I leave the antenna coil for a subsequent owner to restore it later if they want to, just like with your radio.   I sometimes use a ferrite rod hidden inside.  
#13

Beautiful! High on my list of Philcos to have, kinda surprised it's eluded me so long. But, here's to hoping!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM

[-]
Who's Online
There are currently no members online.

>