Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ID of Philco's
#1

All, Here are 3 pictures of some Philco radios. I cannot find a model number on any. Can someone please ID ?

Thanks

Skip...

[Image: http://i292.photobucket.com/albums/mm38/...bhzoyl.jpg]

[Image: http://i292.photobucket.com/albums/mm38/...snhlof.jpg]

[Image: http://i292.photobucket.com/albums/mm38/...lc6f1i.jpg]

Found at antique store..
#2

Alll 3 are post war sets. 46-1201, or so, 47-1230, and a 46-350. You can find them here  http://philcoradio.com/gallery/#list

Terry
#3

Terry, Ok thanks.. the one looked closer to a 46-1209 ..
instead of a 47-1230..


Skip...
#4

 The first set could also be a 48-1201, which was the same set but with some miniature tubes, and slug tuned IF cans, I believe that the B+ voltage was higher as well.

http://www.philcoradio.com/gallery/1948a.htm#w

 The console is a 46-1209 and the last set is a 46-350, unless it has an imitation alligator covering then it would be a 48-360.
Regards
Arran
#5

All, Ok thanks.. Just a quick Question.. What are these worth.. Consider them Not working..

So I know what to offer..

Skip...
#6

All, Ok picked up all three radios for 25.00 each.. Cabinets are not in great shape. But radio itself looks OK.. Will not know until I start to pull apart.. Parts are probably worth what I paid..

Thanks
to ALL

Skip...




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 856 online users. [Complete List]
» 2 Member(s) | 854 Guest(s)
AvatarAvatar

>