Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

1932 Mystery Cathedral Radio Restore on YouTube
#16

Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16. http://philcoradio.com/phorum/showthread...481&page=2

Good videos!


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#17

(10-07-2016, 06:08 PM)Radioroslyn Wrote:  Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16.       http://philcoradio.com/phorum/showthread...481&page=2

Good videos!

You're right...they are cousins haha...Looks like the Philco 10k pot I ordered will work then....thanks, Buzz
#18

buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#19

(10-08-2016, 10:45 AM)sam Wrote:  buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Bury it...Icon_sad no way...It will be beautiful... Icon_clap
#20

Part 6 now uploaded Icon_clap

link below to anyone interested

https://www.youtube.com/watch?v=-IeZqu9As2Y
#21

Hello Friends [Image: http://antiqueradios.com/forums/images/s..._smile.gif]

Part 7 now uploaded

link below to anyone interested

https://www.youtube.com/watch?v=csUk_gegQ1o
#22

great work buzz Icon_clap Icon_clap Icon_thumbup
love your video`s


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#23

Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU
#24

(11-06-2016, 07:32 AM)Buzz Wrote:  Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU

Hi Buzz,
Where measuring sm caps having your test leads twisted together is going to add abt one mmfd per twist, short leads are better than long. And yes capacitors are a handy thing, just think a couple of caps a couple resistors and a 1N34 and you've got AVC!!
Enjoy ur videos.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#25

Hello
Part 9 now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=ZaYWHnr0kfA
#26

Buzz, Im glad you showed that new tester you got. I just got one too. Very neat.. Enjoy your videos..

Skip...
#27

(11-12-2016, 08:39 PM)vecher Wrote:  Buzz, Im glad you showed that new tester you got. I just got one too.  Very neat..   Enjoy your videos..

Skip...

Hi Skip..That littler tester certainly came in handy measuring henrys....Buzz
#28

Hello

Part 10 and FINAL episode now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=PyVRQENnuFs
#29

Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#30

(11-26-2016, 10:15 AM)Radioroslyn Wrote:  Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

yes, that's the Beau Hunks playing The little rascals and laurel and hardy music I use.....Buzz




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM

[-]
Who's Online
There are currently 2520 online users. [Complete List]
» 1 Member(s) | 2519 Guest(s)
Avatar

>