Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I acquired this one about three years ago. Went to Massachusetts to pick it up.
Now it's number is up, I decided to give it the resto session.
It is in good shape, fairly clean. The grillcloth is missing but the cone is near mint. And I had ordered the herringbone Kenny recommended. From Kenny. 
The chassis is on my bench now.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,575
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
come on mike that's the cleanest work area I have ever seen 
and it`s about time you get to that
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have just vacuumed it after the mess Kirk has left here
One more feature: it has the old FM band. Not sure what to do with it. It's useless today. Building the converter is not my plan.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I have one of those Mike. I've Been walking by it for the last year. Look forward to your restoration and what you encounter.
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Mike
One thing I noticed, the external wiring uses the infamous rubber coated wire and it is ... molting
Other than that, console Zeniths, as most large chassis single-storeyed jobs, don't present many inconveniences while working on them. I hope the transformer is good, as other things are fairly simple. I had to rewind an RF choke on the 9S262 I did 4 years back, it wasn't too bad.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,513
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Those are pretty nice looking, some say too much with the spindles and cut out on front but I like em..
Good luck.
Paul
Tubetalk1
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Matter of taste, Paul, matter of taste. I like it. Else I wouldn't go all the way yo Plymouth Mass to get it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
The Zenith Spinet is one radio I would gladly still welcome into my collection if I could find one. I found a few four years back, but people here think they are worth a fortune. Now with the stupid maker's movement, I fear these neat radios might be prime targets for wine rack or i-pod dock conversion. 
No matter where you go, there you are.
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
There's one in OH right now for $695. Crazy price, bought mine for 200.
But it has the offer option and it's been there awhile and it won't sell any time soon at this price.
http://www.ebay.com/itm/1941-VINTAGE-Zen...SwImRYcZjg
And another one
http://www.ebay.com/itm/Antique-Zenith-C...SwtpZYSYNH
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Wow, they are both high and I really don't have much money to play with since spending $180 on tires for the van yesterday. Also, no paypal.. Akron isn't far from me, but I have never heard of Sylvania, Ohio. Now I have to look that up!
No matter where you go, there you are.
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Overseas? They make good swords over there.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Here's a question. Riders does not have the sch. The sch has external b!ocks and some pieces but no full sch or chassis drawing.
There is 10H571R but I am not sure it is the same, plus the chassis is different.
Does anyone have the docs for this one or a link I could follow?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
did you Google it,,,because it comes up in Antigue radio forum ,,, article ---schematic
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Antique electronic supply has it ,,,copy the display,,,,found under google,,,CHEERS
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| So far still no broadcast, I am posting pictures of #14 Oscillator and also a resistor #27 which connects to an XXL tube...osanders0311 — 04:02 PM |
|
Part numbers to model cross
|
| I believe there is that document, and I think we might have it in the Library.morzh — 03:29 PM |
|
Philco 42-345 Restoration/Repair
|
| Ok MrFixr55,
I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM |
|
Part numbers to model cross
|
| Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM |
|
Philco 42-345 Restoration/Repair
|
| Hi OSanders,
Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM |
|
5U4 vs 5Z4 tubes
|
| I think that RCA and GE introduced metal tubes in the USA in 1936. I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM |
|
Philco 42-345 Restoration/Repair
|
| Vlad95,
Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM |
|
5U4 vs 5Z4 tubes
|
| A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM |
|
Philco 42-345 Restoration/Repair
|
| Thanks Rod,
"When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM |
|
Philco 42-345 Restoration/Repair
|
| RodB
:beerchug:Vlad95 — 10:22 AM |
|
Who's Online
|
There are currently 1046 online users. [Complete List]
» 1 Member(s) | 1045 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
