Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

willys jeepster philco radio
#1

hi i am new to this forem looks great!
i live in the netherlands and am currently restoring a willys 1949 jeepster
as extra the customers could order a philco deluxe push button car radio.
but i only have the template for cutting out the dash but no extra info such as looks, pictures, model number.
can anyone help me here,??
they use either this philco or the detrola model 8030
( if anyone comes across one of these it's also ok for my restoration, non working no problem.. that counts for either the philco or detrola.)

many thanks
eagle


Attached Files Image(s)
   
#2

Eagle, I've got a couple of 49 jeepsters and I've rebuilt a couple of the detrola 8030's but I've never seen a philco radio in a jeepster (and I've seen hundreds of Jeepster). I just rebuilt a Detrola 8030 for a friend and I'm pretty sure he's going to be selling it soon. Be warned they sell for lots of dollars.
Keith




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 953 online users. [Complete List]
» 2 Member(s) | 951 Guest(s)
AvatarAvatar

>