Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 118 Bakelite Capacitors
#1

I am working on a Philco 118 which has 11 Philco bakelite capacitors in it. The bakelite capacitor information in the past was in the Philco Repair Bench. Is that information still available and if so, where do I go to find the numbers and capacitor connections for the bakelite capacitors?

Thank you,
Best Wishes,
Oscar
nv3g
#2

Don't worry the internet is forever Icon_smile

https://web.archive.org/web/201603242301...rtinfo.htm

I believe that info will return to the current site - it is just undergoing renovations at the moment. See this thread: http://philcoradio.com/phorum/showthread.php?tid=16781
#3

Just about anything you need to know about a Philco radio can be found right here on the Phorum.
Look here.  http://philcoradio.com/phorum/showthread.php?tid=14964   and here    http://philcoradio.com/phorum/showthread.php?tid=9107



Steve

M R Radios   C M Tubes
#4

There's a website that lists all of the bakelite condensers by part number with related contents and values... I can't find it currently but have it saved to my favorites at home. I'll post it tonight.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#5

Oh nevermind, Nathan posted it up above.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."




Users browsing this thread:
[-]
Recent Posts
Another amp build - here I go again!
Sweet! I actually have a Dyba Mark 4 that I had been running with 6L6s with no mods. seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM
Electrolytic restuffing/internals
Look here: Philco-F676-124 Vlad95 — 08:02 PM
PT-6 finished!!
Well the 35Z3 doesn't have a tap on the tube heater for a pilot light, so in this set they have the dial lamp paralleled...Arran — 06:21 PM
Electrolytic restuffing/internals
Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM
Another amp build - here I go again!
Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM
Electrolytic restuffing/internals
There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM
philco predicta
If you have a television signal generator (a must-have for TV repair) and an oscilloscope (the same), then this problem ...RadioSvit — 04:23 PM
HiFi (Chifi) tube amp build - but my own design.
Thanks Rod for the offer but I don't think those would work. There's some differences in the sizing and mounting holes b...TV MAN — 03:13 PM
philco predicta
Bob Anderson (Bandersontv) on Youtube would be the go-to guy on these. Lots of good videos. I don't know what model you ...TV MAN — 03:02 PM

[-]
Who's Online
There are currently no members online.

>