Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ID on this one tuber...?
#1

Any thoughts on manufacturer and model for this one tube radio or tuner?  

The one tube is a 32 and in this set its a Wards Airline 32 though that doesn't mean its a Wards Airline set.  The socket is engraved with 32 as well, so that's the right tube for the set.   One knob flips the back end of the two coils to align the coils, one turns what looks like a rheostat and the center knob turns the tuning cap.  On the back of the chassis is a two prong jack for "phone". Not much else to it.  The front has an Indian and a Covered Wagon design.

Thanks for the help!!!  Icon_thumbup

[Image: https://www.dropbox.com/s/rpmikemhihm32a....jpg?raw=1]

[Image: https://www.dropbox.com/s/cn1q3hp6s0qpp1....jpg?raw=1]

[Image: https://www.dropbox.com/s/gt651iuktmn7vw....jpg?raw=1]

[Image: https://www.dropbox.com/s/7rmcy4d7mo6tw0....jpg?raw=1]

[Image: https://www.dropbox.com/s/tcysa07yxkzaam....jpg?raw=1]

[Image: https://www.dropbox.com/s/zwgmufskldxsbw....jpg?raw=1]
#2

Wow, that's about as bare bones as you can get.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#3

Certainly unique looks like a WPA project?!

Paul

Tubetalk1
#4

Very kwel!!! I would guess that it was a kit of some sort. It is regenerative, the knob one the left control the regeneration, center knob is the tuning and the the knob on the right adjust the filament voltage.
Not sure about the filament wiring as the pic doesn't show it well.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Was hoping you would comment Terry. I will take a closer look at wiring next trip to the museum but I think you have it pretty close!
#6

Obtw I forgot the ant wire, it's the long white that is going diagonally across the bottom of the chassis.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

At least it won't take long to recap!  Icon_lol

Ron

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84
#8

At first glace I thought that it may have been a short wave convertor of some sort, but since it is obviously battery operated, and has no provision for connecting it into the front end of another set, it must be a regenerative receiver, or perhaps a tuned RF amp of some kind.
Regards
Arran
#9

Methinks the connector on the back that sez phone is the give away. If time was no object you could have a look at some magazines from that time period (1931-34) something like Shortwave Craft or Radio News. You maybe able to find an ad or short article on it. Unfortunately it's a very common circuit from back in those days.
The cabinet looks to be home made or something that was repurposed (to use a modern term)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I've found some ads in old Popular Mechanics that discuss one-tubers like this one. Nothing with the Indian motif, though. I wonder if this was intended for a Boy Scout cabin or something similar.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#11

You got the circuit ID'd Terry and if it is one of those kit jobs from back then it could easily have been some small outfit that didn't last too long or as Arran suggests the cabinet may be a home made job. Wallace, thx for looking in the old mags!!
#12

That's a fantastic art deco cabinet! The whole "opening of the Western frontier" theme that was so common in the early '30s. The native guide, the big farmhouse, the airplane at the top, all surrounded by the rays of the rising sun... I would certainly love to have something like that in my collection!

The cabinet doesn't seem homemade to me. Too detailed.
#13

That thing gave me the willies!!!!!   Icon_eek




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM
Electrolytic restuffing/internals
hello bridkarl, Well done ! Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM
philco predicta
Hi CGL18, Here is a link for the schematic from the Early television Foundation: WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM
The list of my radio & TV collection!
Peter; I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM
Electrolytic restuffing/internals
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM
The list of my radio & TV collection!
For fans of antique radio... My new video... How to test radio tubes on a Hickok 530B tube tester? Test radio tubes o...RadioSvit — 01:25 PM
philcorepairbench.com - shadow-meter
Thank you Billpoulsbobill — 11:53 AM
philcorepairbench.com - shadow-meter
Hi, Try here Philco Service Hints & Tips, Number 1 It's from the web archive (Way Back Machine).Keith — 10:17 AM
PT-6 finished!!
Hi Arran,  Yes, you are correct, the "nominal" voltage for these Loctal tubes was the same 6.3 or 12.6 V as...MrFixr55 — 07:48 AM
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM

[-]
Who's Online
There are currently 1073 online users. [Complete List]
» 4 Member(s) | 1069 Guest(s)
AvatarAvatarAvatarAvatar

>