Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Old Radio Parts Questions
#1

Friend of mine dropped off all these NOS in box and miscellaneous radio parts. I think he said found them in a relative's attic.
I wonder if some of you that are parts gurus could tell me anything.

Does it fit any specific model or series?
Is it rare?
Is it worth anything?

(Are the transformers shipped in pieces for patent reasons?)

All comments welcome! (Please refer to picture number.)
Much appreciated!

Rob

[Image: https://s26.postimg.org/8t000yjp5/image.jpg]
[Image: https://s26.postimg.org/jtv55zby1/image.jpg]
[Image: https://s26.postimg.org/wdq9tq055/image.jpg]
[Image: https://s26.postimg.org/oxvllo1tl/image.jpg]
[Image: https://s26.postimg.org/3zku9ucl5/image.jpg]
[Image: https://s26.postimg.org/fas3by8u1/image.jpg]
[Image: https://s26.postimg.org/6fmnnount/image.jpg]
[Image: https://s26.postimg.org/l2nm5cta1/image.jpg]
[Image: https://s26.postimg.org/hdxx5vj95/image.jpg]
[Image: https://s26.postimg.org/wvlf9kpq1/image.jpg]
#2

[Image: https://s26.postimg.org/y834bgn5l/image.jpg]
[Image: https://s26.postimg.org/n0ua3clrt/image.jpg]
[Image: https://s26.postimg.org/df0pn1um1/image.jpg]
[Image: https://s26.postimg.org/6m0cqs3sp/14_A.jpg]
[Image: https://s26.postimg.org/c2nlywmk9/14_B.jpg]
[Image: https://s26.postimg.org/aq5wx0p4p/15_A.jpg]
[Image: https://s26.postimg.org/429baf5mh/15_B.jpg]
[Image: https://s26.postimg.org/xdprgwu2h/image.jpg]
#3

[Image: https://s26.postimg.org/kh38mznll/17_A.jpg]
[Image: https://s26.postimg.org/9g83hyvcp/17_B.jpg]
[Image: https://s26.postimg.org/4gana0pq1/17_C.jpg]
[Image: https://s26.postimg.org/trfcqiybd/image.jpg]
[Image: https://s26.postimg.org/6ootrcwu1/19_A.jpg]
[Image: https://s26.postimg.org/e9wg0kh89/19_B.jpg]
[Image: https://s26.postimg.org/pc1iz0bax/19_C.jpg]
[Image: https://s26.postimg.org/tstvxopix/image.jpg]
#4

Many parts, including the variometer in #1 and some of the tube sockets/knob in #18 are from early radios from 20s.
The thordarson and Stancor xfmrs should have all info written right on the packages or the xfmrs themselves.
Another thing is #18 seems to be a surge arrester (lightening suppressor).

there is also a vernier (the tuning scale mechanism) in #19.

#17B is a loudspeaker horn driver (or so it seems).

#16 is a phone jack or some sort of a jack.
#12 is a tuning cap for a linear dial.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Thanks morzh! I didn't catch the lightning arrester at all, and wasn't sure about the horn driver.
The horn driver is one of the things I kept. He was splitting up the parts with me for testing the tubes (not shown).

Rob




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>