Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

FM Conversion?
#1

Hello Ron, I've got my 41-287 operating again and sounding great but I really miss FM. Would it be possible to add an FM tuner to this radio maybe connecting it through the "Television" feature switch? Many years ago I built an Eico FM tuner kit which I wired into a Magnavox hifi . Has this ever been done on an antique radio? Thanks in advance for any information, JEP
#2

There were a number of FM converters sold in the 60's for car radios that would work with AM radios, and send the siignal to the AM radio. Haven't seen one in many years, but they were cheap and plentiful in their day. Probably some still around.
#3

And don't forget the Pilotuner (T601) if you want to stay within the same timeframe. The generally only fetch $20-30 on ebay and are simple to get going. Better still is the Howard unit, model 482. Both of these deliver an audio output suitable for the inputs of many old radios. I use a Howard with my Midwest 16 tube 'table' set. Icon_smile



Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
#4

Thanks, codefox and exray. So far no luck on e-bay but will keep trying. JEP




Users browsing this thread:
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently no members online.

>